T_Hill
Jun 24, 2004, 11:15 PM
Conversion Motor Works would like to announce the introduction of our new motor kits. We have 2 versions.
#1 Comes with aluminum stator holder with stator mounted and 2 60,000 RPM bearings already mounted. It also comes with bell, 15 N45 magnets, gws prop shaft, and 30 feet of your choice of 11 different wire sizes. Stator is 22.7 mm.
#2 Comes with aluminum stator holder with stator mounted and 2 60,000 RPM bearings already mounted. It also comeswith Magnets and shaft already installed in the bell. You have 2 bell choices 6 pole 12 magnet or 12 pole 12 magnet bell and 30 feet of your choice of 11 different wire sizes. Stator is 22.7 mm.
Wire sizes are 23, 23.5, 24, 24.5, 25, 25.5, 26, 26.5, 27, 27.5 and 28GA wire
Check it out at www.conversionmotorworks.com
or www.conversionmotorworks.com/motor%20kits.htm
#1 Comes with aluminum stator holder with stator mounted and 2 60,000 RPM bearings already mounted. It also comes with bell, 15 N45 magnets, gws prop shaft, and 30 feet of your choice of 11 different wire sizes. Stator is 22.7 mm.
#2 Comes with aluminum stator holder with stator mounted and 2 60,000 RPM bearings already mounted. It also comeswith Magnets and shaft already installed in the bell. You have 2 bell choices 6 pole 12 magnet or 12 pole 12 magnet bell and 30 feet of your choice of 11 different wire sizes. Stator is 22.7 mm.
Wire sizes are 23, 23.5, 24, 24.5, 25, 25.5, 26, 26.5, 27, 27.5 and 28GA wire
Check it out at www.conversionmotorworks.com
or www.conversionmotorworks.com/motor%20kits.htm