PDA

View Full Version : Electronic Hackers Give-Away #4. Free Stuff!


Mr.RC-CAM
Jun 11, 2004, 08:06 PM
There are several items to give away in this thread.

Item #1: NOT AVAIL -- TAKEN BY PROPJOB81

For those that want to try a PCB etch, I have a Radio Shack #276-1576 PCB etch kit I no longer need. I used it long ago and it's been on the shelf after making a couple of boards.

I'll let it go for FREE, but you pay the shipping (UPS or Postal). If you have a UPS acct, then no money needs to change hands! PM me if you want it.

It has a plastic tray for etching, a small bottle of Ferric Chloride (about half used), a little bit of resist ink solvent, and a scrub pad. The copper clad board, 1/16" drill bit, and Sharpie marking pen are missing. {I suggest you skip the Sharpie pen and use the Laser paper method described HERE. (http://www.rcgroups.com/forums/showthread.php?t=237888) }

More info: Radio Shack Link (http://www.radioshack.com/product.asp?catalog_name=CTLG&category_name=CTLG_011_002_008_000&product_id=276-1576&site=search)

Mr.RC-CAM
Jun 11, 2004, 08:10 PM
Item #2:

National ADC0804 A/D Chips. Approx 15 pieces, new old stock. Good for building battery chargers, motor monitors, or other nifty R/C gadgets. DIP Package. Data sheet: http://www.national.com/ds.cgi/AD/ADC0801.pdf

Free: You only have to pay the postage. PM me if you want one or all.

Mr.RC-CAM
Jun 11, 2004, 08:15 PM
Item #3: GONE! No longer Available.

Magnecraft #W171DIP-7 micro sized reed relays. Approx 15 pieces. 5VDC 500 ohm coil (3.8V pull in). SPST 0.5A contacts. DIP package. Perfect for controlling low current R/C circuitry. Digi-Key catalog lists them for $2.20 each. http://www.mouser.com/catalog/618/984.pdf

Free: You only have to pay for postage. Probably less than a couple of bucks. PM me if you want one or all.

Mr.RC-CAM
Jun 11, 2004, 08:21 PM
Things to note:

(1) You must pay the postage using PayPal's "Goods-Other" service type.

(2) Do not email me -- Use eZone's PM feature to make contact (Emails will get lost in my ISP's SPAM filters).

(3) Along with PM'ing me, post a note in this thread mentioning the item(s) you want. That will help others know which goodies are spoken for.

(4) These are really free items. No strings attached, other than they must be for YOUR personal use on R/C related projects.

RC-CAM

Propjob81
Jun 15, 2004, 08:33 PM
Hi, I really need the etch kit. How much of the stuff is left in it, and has it been used and poured back into the container?

Mr.RC-CAM
Jun 15, 2004, 08:39 PM
How much of the stuff is left in it ... ?
It is a 6 oz bottle that a bit over half full.

... and has it been used and poured back into the container?
I don't recall. If I had to guess, I would say it is virgin.

Propjob81
Jun 15, 2004, 09:10 PM
I'll take it! Just sent you the money via paypal.