Brushless motor for Hornet II

[Kelven Ma]

Dear All,

I am building a Hornet II. I suppose to use brushless motor, i saw a cheap
brand Himax brushless motor, could anyone tell me which model are the best
for the Hornet II for 3D and normal flying and also ESC.

Thanks. Happy flying.

Regards,
Kelven Ma

[Davomatic]

From what I have seen, the 2015-4100 would be the way to go. I am building one now and using a Hacker B20-22S with a CC Phoenix 10 BEC.

[Dave]

Question if I uaed a himax or hacker where do you get the 2mm pinion gear
from thanksfor info
"Davomatic" <Davomatic.14dwmt@rcgroups.com> wrote in message
news:Davomatic.14dwmt@rcgroups.com...
>
> From what I have seen, the 2015-4100 would be the way to go. I am
> building one now and using a Hacker B20-22S with a CC Phoenix 10 BEC.
>
>
> --
> Davomatic - off on a tangent
>
> Dave
> --------------------------------------------------------------------------
---------
> Posted from the RCGroups.com Discussion Forums.
> Visit us at http://www.rcgroups.com <------- Win free R/C Gear!
> View this thread at rcgroups.com:
http://www.rcgroups.com/forums/showthread.php?threadid=218367
>

[Kelven Ma]

you can try to find some have 2.3 mm shaft,

hacker B20 22S is a good choose, how about B20 26S? or other brand?

"Dave" <kittie@core> ¦b¶l¥ó news:107c2la1lk54571@corp.supernews.com ¤¤¼¶¼g
....
> Question if I uaed a himax or hacker where do you get the 2mm pinion gear
> from thanksfor info
> "Davomatic" <Davomatic.14dwmt@rcgroups.com> wrote in message
> news:Davomatic.14dwmt@rcgroups.com...
> >
> > From what I have seen, the 2015-4100 would be the way to go. I am
> > building one now and using a Hacker B20-22S with a CC Phoenix 10 BEC.
> >
> >
> > --
> > Davomatic - off on a tangent
> >
> > Dave
>
> --------------------------------------------------------------------------
> ---------
> > Posted from the RCGroups.com Discussion Forums.
> > Visit us at http://www.rcgroups.com <------- Win free R/C Gear!
> > View this thread at rcgroups.com:
> http://www.rcgroups.com/forums/showthread.php?threadid=218367
> >
>
>

[Ron van Sommeren]

Goedendag ;-)

Use an old cd-rom motor and rewind it. These motors cost next to nothing
(from a scrapped cd-rom player or from www.gobrushless.com).

English building instructions for helicopter cd-rom conversion:
http://homepages.enterprise.net/jayjay/cdrom_motors.htm
http://members.jcom.home.ne.jp/4223215501/CD_Brushless.htm
http://www.btinternet.com/~michaelhogg/piccolo/cdrom/cdrom_conversion_fina
l.jpg

Discussion:
http://www.ikarus-modellbau.de/ubbthreads/postlist.php?Cat=&Board=UBB1
http://www.rcgroups.com/forums/showthread.php?threadid=206925

Met vriendelijke groet ;-) Ron van Sommeren
near Nijmegen, the Netherlands