Help!!! Servo wires ??

[sanitarium]

Can someone please doublecheck my ESC / servo / receiver wiring?

In this pic are the orange / red / brown wires in the right sequence for
this airtrinics std receiver?

http://images.cardomain.com/member_images/5/web/401000-401999/401268_148_full.jpg

And in these pictures are my ESC wires configured right?

http://images.cardomain.com/member_images/5/web/401000-401999/401268_150_full.jpg
http://images.cardomain.com/member_images/5/web/401000-401999/401268_149_full.jpg

Thanks!! Just seeking out advice before I fry something.

Garrett

[Chris Dugan]

"sanitarium" <hpiman@hotmail.com> wrote in message
news:404D5D0F.800@hotmail.com...
> Can someone please doublecheck my ESC / servo / receiver wiring?
>
> In this pic are the orange / red / brown wires in the right sequence for
> this airtrinics std receiver?
>
>
http://images.cardomain.com/member_images/5/web/401000-401999/401268_148_ful
l.jpg
>
> And in these pictures are my ESC wires configured right?
>
>
http://images.cardomain.com/member_images/5/web/401000-401999/401268_150_ful
l.jpg
>
http://images.cardomain.com/member_images/5/web/401000-401999/401268_149_ful
l.jpg
>
> Thanks!! Just seeking out advice before I fry something.
>
> Garrett
>

The correct wiring sequence is:

Cirrus/JR Futaba in English
leads

Red = Red = Positive battery supply
Brown = Black = Negative supply / ground
Orange = White = Signal

So re-wire that speedo plug double time BEFORE you fry the BEC circuit
inside it and the RX and possibly the servo as well.

Chris


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.614 / Virus Database: 393 - Release Date: 05/03/2004