which servo?

[david]

I currently have Futaba 9001s on my Sceadu, with a 9252 on the tail. I have
just acquired a 9304 and a 9002. Which (if either) would be better suited
to the collective function in place of the 9001?

Its a daft question probably, but I have not got a spec card for them!

D

[Clifford Wallace]

I've just looked through the Ripmax catalogue and I do not see these servos
listed. Are they new or second hand? I would put the 9252 on the pitch and
buy a 9253 for the tail.

Clifford


"david" <david_perry@btconnect.com> wrote in message
news:bq28jl$pgi$1@sparta.btinternet.com...
> I currently have Futaba 9001s on my Sceadu, with a 9252 on the tail. I
have
> just acquired a 9304 and a 9002. Which (if either) would be better suited
> to the collective function in place of the 9001?
>
> Its a daft question probably, but I have not got a spec card for them!
>
> D
>
>

[Clifford Wallace]

I've just looked through the Ripmax catalogue and I do not see these servos
listed. Are they new or second hand? I would put the 9252 on the pitch and
buy a 9253 for the tail.

Clifford


"david" <david_perry@btconnect.com> wrote in message
news:bq28jl$pgi$1@sparta.btinternet.com...
> I currently have Futaba 9001s on my Sceadu, with a 9252 on the tail. I
have
> just acquired a 9304 and a 9002. Which (if either) would be better suited
> to the collective function in place of the 9001?
>
> Its a daft question probably, but I have not got a spec card for them!
>
> D
>
>

[david]

Second hand. Thanks though.

D
"Clifford Wallace" <clifford@wallace6514.freeserve.co.uk> wrote in message
news:bq2v6h$5qm$1@newsg4.svr.pol.co.uk...
> I've just looked through the Ripmax catalogue and I do not see these
servos
> listed. Are they new or second hand? I would put the 9252 on the pitch
and
> buy a 9253 for the tail.
>
> Clifford
>
>
> "david" <david_perry@btconnect.com> wrote in message
> news:bq28jl$pgi$1@sparta.btinternet.com...
> > I currently have Futaba 9001s on my Sceadu, with a 9252 on the tail. I
> have
> > just acquired a 9304 and a 9002. Which (if either) would be better
suited
> > to the collective function in place of the 9001?
> >
> > Its a daft question probably, but I have not got a spec card for them!
> >
> > D
> >
> >
>
>
>

[david]

Second hand. Thanks though.

D
"Clifford Wallace" <clifford@wallace6514.freeserve.co.uk> wrote in message
news:bq2v6h$5qm$1@newsg4.svr.pol.co.uk...
> I've just looked through the Ripmax catalogue and I do not see these
servos
> listed. Are they new or second hand? I would put the 9252 on the pitch
and
> buy a 9253 for the tail.
>
> Clifford
>
>
> "david" <david_perry@btconnect.com> wrote in message
> news:bq28jl$pgi$1@sparta.btinternet.com...
> > I currently have Futaba 9001s on my Sceadu, with a 9252 on the tail. I
> have
> > just acquired a 9304 and a 9002. Which (if either) would be better
suited
> > to the collective function in place of the 9001?
> >
> > Its a daft question probably, but I have not got a spec card for them!
> >
> > D
> >
> >
>
>
>

[Philip Henderson]

Goto www.futaba-rc.com and look at the servo specs there.

Phil.

"david" <david_perry@btconnect.com> wrote in message
news:bq2vfb$g8b$1@hercules.btinternet.com...
> Second hand. Thanks though.
>
> D
> "Clifford Wallace" <clifford@wallace6514.freeserve.co.uk> wrote in message
> news:bq2v6h$5qm$1@newsg4.svr.pol.co.uk...
> > I've just looked through the Ripmax catalogue and I do not see these
> servos
> > listed. Are they new or second hand? I would put the 9252 on the pitch
> and
> > buy a 9253 for the tail.
> >
> > Clifford
> >
> >
> > "david" <david_perry@btconnect.com> wrote in message
> > news:bq28jl$pgi$1@sparta.btinternet.com...
> > > I currently have Futaba 9001s on my Sceadu, with a 9252 on the tail.
I
> > have
> > > just acquired a 9304 and a 9002. Which (if either) would be better
> suited
> > > to the collective function in place of the 9001?
> > >
> > > Its a daft question probably, but I have not got a spec card for them!
> > >
> > > D
> > >
> > >
> >
> >
> >
>
>

[Philip Henderson]

Goto www.futaba-rc.com and look at the servo specs there.

Phil.

"david" <david_perry@btconnect.com> wrote in message
news:bq2vfb$g8b$1@hercules.btinternet.com...
> Second hand. Thanks though.
>
> D
> "Clifford Wallace" <clifford@wallace6514.freeserve.co.uk> wrote in message
> news:bq2v6h$5qm$1@newsg4.svr.pol.co.uk...
> > I've just looked through the Ripmax catalogue and I do not see these
> servos
> > listed. Are they new or second hand? I would put the 9252 on the pitch
> and
> > buy a 9253 for the tail.
> >
> > Clifford
> >
> >
> > "david" <david_perry@btconnect.com> wrote in message
> > news:bq28jl$pgi$1@sparta.btinternet.com...
> > > I currently have Futaba 9001s on my Sceadu, with a 9252 on the tail.
I
> > have
> > > just acquired a 9304 and a 9002. Which (if either) would be better
> suited
> > > to the collective function in place of the 9001?
> > >
> > > Its a daft question probably, but I have not got a spec card for them!
> > >
> > > D
> > >
> > >
> >
> >
> >
>
>