new 3d plane

[nate 1001]

I'm thinking about getting a new funflyer. I can't decide what to get. Should I get a funtanas with a saito 72 or a ucando with an os 4 stroke? I want to be able to do anything but still a fun to fly plane. Any suggestions welcome.

[TIA]

How about an Edge 540?

:D

[Mindstorm]

Check out Foamyfactory.com

They have fun 3d planes. Planes designed by Tim.

You can cath up on fun 3dx planes on this threads.

http://www.rcgroups.com/forums/showthread.php?s=&postid=1533408#post1533408

[Carlos Diaz]

Absolutely Funtana S!!! I have one and it's just plain awsome
If u want a smaller though, then the ucando. It's just as fun(i have one too)

[RiBell]

Originally posted by Carlos Diaz
Absolutely Funtana S!!! I have one and it's just plain awsome
If u want a smaller though, then the ucando. It's just as fun(i have one too)
I've been drooling over the Funtana add for a while now and my Satio 72 looks so lonely on the shelf.
Carlos.
What have you got for power in yours? How do you think it will do with the 72
Rick

[pro bro steve]

Here is mine just re did the top trim and fuse. I used a ys 63 it what I had.

[RiBell]

whst happen to the picture all I got was a big grey square

[TIA]

Steve,

You did a beautiful job!

Looks Great!!!!

:D

[t_predator90]

Originally posted by RiBell
whst happen to the picture all I got was a big grey square

It is censored for content. You should see the naked chick on the cowl;)

[RiBell]

is she holding the airplane

[FreeDer]

Have u seen the new Fusion 3D?

[scooterdude]

Awsome color schem Pro Bro. Keep up the good work onthe funtana. Love the artwork on the cowl too.

[going vert]

Get a Mini 3D from extreme flight RC. Plane kicks butt!

[nate 1001]

too late already bought one and flew it

[RiBell]

Originally posted by pro bro steve
Here is mine just re did the top trim and fuse. I used a ys 63 it what I had.
Don't know why but everytime that I've read this thread all I got was a big grey square for the pic. This time I got aboyt 3/4 of the pic and the bottom is grey.
Got enough to see the airplane though. looks good.
Steve:
how did you redo the top? Did you strip all the top side covering off, or just the trim colours, then add your colours?
Rick

[pro bro steve]

The cowl is painted with Rust-Oleum metallic blue with clear coat sealer 1/8'' silver pin stripes. Easy and clean. SL

[t_predator90]

LoL... Gotta love those aileron deflections....

[TIA]

Look at the % in that wing too! It prolly floats like a butterfly!!!:D

[skyyking]

Originally posted by pro bro steve
Here is mine just re did the top trim and fuse. I used a ys 63 it what I had.

Who makes the plane you posted?

[plumb]

hanger9

[FlyHard]

Originally posted by pro bro steve
The cowl is painted with Rust-Oleum metallic blue with clear coat sealer 1/8'' silver pin stripes. Easy and clean. SL

What clear coat did you use. I have had some problems with clear coat not being very fuel proof with high nitro. The plane looks great. How does the YS .63 pull it.

[pro bro steve]

Clear Kote I used on the Rust-oleum was Top Flite LustreKote crystal clear. When using it spray light it will heat the paint and run if not sprayed lightly and let dry . I caused some blue runs in it when first started using it I almost left it looked like flames drops but it sanded out ok. I have some clear Rust-oleum Lacquer but need to test it to see if it is fule proof It sure beats the hobbie store prices at $3.50 A can. The YS 63 engine pulls it great I am using 30% cool power pattern pro fuel I got for $10 a gallon at my LHS so I stocked up on it. Steve