cg

[Mark]

Can anyone give me any tips on setting up the cg on my Raptor 50

[luke collins]

Hold the head block or blade grips with the blades off, lift the heli 1/2
full of fuel at 90 degrees to the floor and watch wich way the tail goes.
You should be holding it in front of you so it can swing with the nose
either pointing up or down. So if it does not move then its about centre
c.g over the main shaft. If it moves this proves its either nose or tail
heavy. Depending on the rotation and start pos. will allow you to work out
which is off c/g.

Hope this helps.

"Mark" <mark2.duffy@btinternet.com> wrote in message
news:bnuip4$3kk$1@hercules.btinternet.com...
> Can anyone give me any tips on setting up the cg on my Raptor 50
>
>