Re: [EFLT] GWS Speed Controller

[Kevin Russell]

I found this not sure what language though??



Navigator F112 fartreglage med back. Data: 112 A fram,

56 A back, resistans: 0.014

?, pulsfrekvens: 50 Hz, BEC
http://216.239.59.104/search?q=cache:7MnrLT0ALb8J:www.minicars.se/pdf/M299Ca.pdf+Navigator+F112&hl=en&ie=UTF-8


Kevin

"waterboat" <waterboat.w04r6@rcgroups.com> wrote in message
news:waterboat.w04r6@rcgroups.com...
>
> Hi,
> I'm really trying to get instructions for this speed control fromGWS so
> far I haven't had any luck, I am going to send them an email to see if
> they can send some.
> It says on the control suitable for motors from 400 to 850 so my 600
> would seem to be within those limits.
> It works perfect in forward its just that in reverse the stick goes all
> the down to the bottom then you get full speed in reverse.
> some friends say that doesn't really matter as reverse is only normally
> used as a brake or to pull out of trouble.
>
>
> --
> waterboat
> --------------------------------------------------------------------------
---------
> Posted from the RCGroups.com Discussion Forums.
> Visit us at http://www.rcgroups.com <------- Win free R/C Gear!
> View this thread at rcgroups.com:
http://www.rcgroups.com/forums/showthread.php?threadid=163543
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.530 / Virus Database: 325 - Release Date: 22/10/2003

[Dreamscape]

On Tue, 28 Oct 2003 19:31:35 -0000, "Kevin Russell"
<donmailme@ntlworld.com> wrote:

>I found this not sure what language though??

nor I

>Navigator F112 fartreglage med back. Data: 112 A fram,
>
>56 A back, resistans: 0.014
>
>?, pulsfrekvens: 50 Hz, BEC
>http://216.239.59.104/search?q=3Dcache:7MnrLT0ALb8J:www.minicars.se/pdf/=
M299Ca.pdf+Navigator+F112&hl=3Den&ie=3DUTF-8

it also adds lists the following:

>5 v/0.8 A, 5-10 celler, inst=E4llning via pottar, vikt: 66 g


All up translation:

112 amp max forward current
56 amp max reverse current
0.014 ohm in-circuit resistance
50 Hz pulse frequency (very low, not nice on the motor)
ESC supply voltage: 5 to 10 cells (6 to 12 volt)
BEC output: 5 volts, 0.8 amps (enough for the receiver and a medium
size rudder servo but not a lot more)
unit weight (not including wires & plugs) : 66 grams (a bit over 2
ounces)

hope this helped someone

[Bengt Persson]

For your information, the language is swedish.

Bengt

"Dreamscape" <none@nothanks.com> skrev i meddelandet
news:ogkupv4r5sujq9hflfmicrfjeebt0up0pi@4ax.com...
On Tue, 28 Oct 2003 19:31:35 -0000, "Kevin Russell"
<donmailme@ntlworld.com> wrote:

>I found this not sure what language though??

nor I

>Navigator F112 fartreglage med back. Data: 112 A fram,
>
>56 A back, resistans: 0.014
>
>?, pulsfrekvens: 50 Hz, BEC
>http://216.239.59.104/search?q=cache:7MnrLT0ALb8J:www.minicars.se/pdf/M299C
a.pdf+Navigator+F112&hl=en&ie=UTF-8

it also adds lists the following:

>5 v/0.8 A, 5-10 celler, inställning via pottar, vikt: 66 g


All up translation:

112 amp max forward current
56 amp max reverse current
0.014 ohm in-circuit resistance
50 Hz pulse frequency (very low, not nice on the motor)
ESC supply voltage: 5 to 10 cells (6 to 12 volt)
BEC output: 5 volts, 0.8 amps (enough for the receiver and a medium
size rudder servo but not a lot more)
unit weight (not including wires & plugs) : 66 grams (a bit over 2
ounces)

hope this helped someone