Declan
Sep 26, 2003, 04:01 AM
Hi,
What lengths should the springs be for both front and rear.
My 2nd hand impact '99 spec would only touch the springs when the collar was
screwed fully down on the shock body.. I could not pretension them.
I thougth they were probably wrong, so I bought some new serpent springs.
Same problem.. Its as if the (rear) springs are 10mm too short.
The rear shock does measure 75mm, from top of cap to bottom of rod end,
which appears to be correct, but I dont know for sure, as I have no manual !
pics available at:
http://www.declangrady.com/serpent_shocks.html
Thanks,
Declan
What lengths should the springs be for both front and rear.
My 2nd hand impact '99 spec would only touch the springs when the collar was
screwed fully down on the shock body.. I could not pretension them.
I thougth they were probably wrong, so I bought some new serpent springs.
Same problem.. Its as if the (rear) springs are 10mm too short.
The rear shock does measure 75mm, from top of cap to bottom of rod end,
which appears to be correct, but I dont know for sure, as I have no manual !
pics available at:
http://www.declangrady.com/serpent_shocks.html
Thanks,
Declan