How do I stop the RealFlight G2 slow-mo?

[t_predator90]

I had to reinstall G2, and when I reinstalled it, it was VERY slow (not lagging, just slow, Matrix like). I checked the menus and found the Slow-Mo option. It was at 100%, which means it should work normally. Right? But it doesen't. I tryed playing with the bar, putting it at 150%, then 50%, then 0%, but it make no changeI re-reinstalled G@, and it was slightly faster, but not much. How do I stop it? I REALY don't want to have to reinstall G2 75,000,000,000 times, just to get it right.....

[t_predator90]

Anyone? Pleeeeeeeeeeeeease! I really need some stick time on G2!:(

[mode1]

Did the flight simm work correct after the first install? I checked my instructions for G2. They say to try removing items from airports. Go to "item visibility" and uncheck items. Or, choose "select airport" and deselect items.

Also, reduce or discard recordings in use. Try to eliminate collisions by going to "option" and remove check from "enable collisions. Also check your ram. See if your drivers need to be updated. Harddrive need cleaned and defraged? Any other programs seem slow? Again, more ram is good.

[t_predator90]

No, that's to stop lag. Lag is when it works like a frame-by-frame slideshow because of a slow RAM or vid card. This is Matrix-like slow. it's works smoothly, but in slow motion. yes, after the first ever instalation it worked fine.