Controller for PJS 1000??

[temacc]

I am looking at the PJS 1000 for my Wattage Ultimate bipe, and wonder if there is a CC controller (my favorite brand) that will work well with that motor. (pulls 18-23 amps)

I note that the Jeti is specifically mention NOT to use with the motor, which is why I want to ask - specifically - about using a CC controller with the PJS.

Tried it out on one? Guesses? :)

Thanks,

Another happy 'user',

Terry

[Shawn Palmer]

Terry,

We're getting in the entire H-L line of outrunners to test w/our controllers in the next day or two.

There is a known issue when you run outrunners at high cell counts, and/or near the performance limit of the motors. What we're hearing is that they get up to 80% throttle or so, and then drop rpm, become slightly erratic, or cut out. Patrick tells me it will be a relatively simple "umbrella" fix in the software for all outrunners most likely available in mid/late July.

If you ran it on say - 7 cells and max draw of 18A or so, you'd most likely be OK, or you could wait for the fix and be able to "max it out".

Shawn Palmer
Product Specialist
www.castlecreations.com
shawnp@castlecreations.com

[temacc]

Shawn,

Thanks - will look for future postings here, as to Patrick's machinations.

Terry