Eclipse7 problem.. or am I retarded?

[TheTick]

I use S.TM1 and S.TM2 for camber and reflex. For some reason, STM2 no longer turns off when I put the flight mode switch in the neutral position. In other words, the S.TM2 function remains on when the flt.mode switch is in neutral. Please help!

[MikeMayberry]

I'm not sure what it could be unless the switch is defective. I would switch to another model memory and see if it still does it. If so, then you will need to send it in for repair.

Mike.

[TheTick]

I've tried other model memories and still the same prob. It must be the switch. How long is your repair turn around time? I don't want to miss out on too much flying. Thanks!

[TheTick]

Ok, I just took out the switch and swapped the wires from the two ON positions figuring that the problem would change to the STM1 position. STM2 is still the problem so I know it's not the switch.

I guess I'll have to send it in but I don't want to wait too long before I get it back. If you could tell me avg turn around time, I would appreciate it. Thanks again Mike.

[MikeMayberry]

7-10 working days plus shipping time.