Biggie in PA
Jul 01, 2003, 04:01 AM
Yes, The "sensitivity and/or on/off can be controlled by the xmitter."
This is done by using a channel. The channel turns it on/off.
--
Biggie in PA
sjg1958 at hotmail dot com
"David" <djross33@ozemail.com> wrote in message
news:3EFF906F.AA88D134@ozemail.com...
> If it can't then the manual the have been reading is very different to the
one that came with my
> Co-Pilot - my manual clearly states sensitivity and/or on/off can be
controlled by the xmitter.
> If it can't then I am going to be really pissed off since I just bought a
new xmitter so I can
> do just that. My brand new (old) xmitter only had 4 channels.
>
> David - who wonders who "everyone" is?
>
> Biggie in PA wrote:
> >
> > From what everyone told me... No, it can't.
> >
> > --
> >
> > Biggie in PA
> > sjg1958 at hotmail dot com
> >
> > "David" <djross33@ozemail.com> wrote in message
> > news:3EFA5776.2A643231@ozemail.com...
> > >
> > >
> > > Philip Martin wrote:
> > >
> > > > I cant remember if it can be set up to be permanently on, thus
negating
> > the
> > > > need for a spare channel, check their web site and documents.
> > > >
> > > It is your choice - it can be set permanently on (or off), with manual
> > adjustment of sensitivity
> > > - on/off with a spare channel, or if you have a 'variable' channel,
you
> > can do on/off or vary
> > > the sensitivity.
> > >
> > > David
This is done by using a channel. The channel turns it on/off.
--
Biggie in PA
sjg1958 at hotmail dot com
"David" <djross33@ozemail.com> wrote in message
news:3EFF906F.AA88D134@ozemail.com...
> If it can't then the manual the have been reading is very different to the
one that came with my
> Co-Pilot - my manual clearly states sensitivity and/or on/off can be
controlled by the xmitter.
> If it can't then I am going to be really pissed off since I just bought a
new xmitter so I can
> do just that. My brand new (old) xmitter only had 4 channels.
>
> David - who wonders who "everyone" is?
>
> Biggie in PA wrote:
> >
> > From what everyone told me... No, it can't.
> >
> > --
> >
> > Biggie in PA
> > sjg1958 at hotmail dot com
> >
> > "David" <djross33@ozemail.com> wrote in message
> > news:3EFA5776.2A643231@ozemail.com...
> > >
> > >
> > > Philip Martin wrote:
> > >
> > > > I cant remember if it can be set up to be permanently on, thus
negating
> > the
> > > > need for a spare channel, check their web site and documents.
> > > >
> > > It is your choice - it can be set permanently on (or off), with manual
> > adjustment of sensitivity
> > > - on/off with a spare channel, or if you have a 'variable' channel,
you
> > can do on/off or vary
> > > the sensitivity.
> > >
> > > David