Product testers Sacramento Ca only please.

[Speed-3]

Hello all:


We are an up and coming Radio control company here in Sacramneto Ca We are looking for about 3-5 persons to test
some products. mostley Speed controls Brushed and brushless
We have about 12 models in our line and are in our last phase of testing before we go to market world wide.if anyone is interested
in being on the SPEED-CUBED TEAM please contact me.

We would like some one that flys a least 2 times a week.
Again please locals only.

Thank you very much.


contact:

Ken Anderson
SPEED CUBED INC
speedcontrol@attbi.com
or jetsetsupport@attbi.com

[GregG]

Welcome to The Ezone, Ken! :D

We can never have enough speed controllers available. Can you give us a few specs. on your current models?

It was great talking to you today. We'll have to get together and do some flying soon. :cool:

[Speed-3]

You Bet:

Features & Specifications:
Battery Eliminator Circuit (BEC) - 1.5 Amps "3-4 servos" 4 -10 Cells
Safe arming
Digital radio filter
Dual color Led. Armed and Low voltage
Simple Setup Fixed start and end points
75 step power band For smooth 3-D control
All Surface Mount Construction
Heat sink mounted to Mosfets and Bec
Exponential Reverse Throttle
Auto Motor Cut-Off with reset
Auto Shut-Down When Signal Is Lost
Microprocessor Controlled 12 Bit RISC " C " Programing
Cells w/ BEC: 4 - 16
Cells w/o BEC: 2 - 24
Continuous: 15 Amps / 25 Amps / 45 Amps / 65 Amps / 80 Amps - Varys with Model
Surge: 35/45/85/120/140 Amps
Switching Rate: 3000 /1225 Hz
Resistance: 0.00175 Ohms varys with model
Brake: No
Reversible: No
Low Voltage Cut-Off Yes
Size: 0.5in x 1.5 in x 0.2in
Weight (w/wires):TBD
Weight w/no wires 3 Grams
Connector: Universal Type 28 Ga 6"
Wire Type 16Ga / 14Ga on M-65 M-80

[Speed-3]

[QUOTE]Originally posted by GregG
[B]Welcome to The Ezone, Ken! :D

We can never have enough speed controllers available. Can you give us a few specs. on your current models?

It was great talking to you today. Ken