Ordered a Savage! Suggestions for spare parts, hop-ups?

[Tim Girvin]

So, after a previous suggestion and some research, this is whay I'm going
with. Does anyone have any suggestions for spare parts and/or hop-ups? I'm
thinking of an Ofna hyper 21 8 port eventually. What other upgrades should I
make with that engine?

I CAN"T WAIT!!!!

TIA

Tim

[Kevin McDade]

I would definitely install CVD's or HD dog bones on all four corners and the
2 in the center...the stock ones are pretty wimpy. Lighter weight wheels
and tires, motor saver air filter... I would run the stock engine for a
while...I actually liked my stock engine. It was very predictable, decent
top and bottom speed, VERY easy to start and tune. I didn't break anything
while running the stock engine. I installed all of my upgraded drive train
components when I installed my Force 25...it immediately broke the rear,
center dog bone so I decided to replace all of the stock dog bones with Hot
Bodies CVD's in the center and HPI HD dogbones on the corners. Hope this
helps.


"Tim Girvin" <tgirvin@monarch.net> wrote in message
news:9a5fbb4ead10e89aefe14f6006c58d63@unlimited.ul trafeed.com...
> So, after a previous suggestion and some research, this is whay I'm going
> with. Does anyone have any suggestions for spare parts and/or hop-ups? I'm
> thinking of an Ofna hyper 21 8 port eventually. What other upgrades should
I
> make with that engine?
>
> I CAN"T WAIT!!!!
>
> TIA
>
> Tim
>
>