PDA

View Full Version : Has Anyone else had Problems with CC ESC`s and Mega Motors?


kushal_22
Jun 24, 2003, 09:08 PM
My Motor starts and stops. At times does not want to shut down all the way AND I have even had some Glitching inolving servo`s While it is in Flight. As soon as i shut the motor off i regian control. I have treid a 35(Dual Board) and a 45(Dual Boar) and they both act somewhat the same. In fact When the motor was cutting in and out today I shut it down and was not able to restart when igot into a dicey situation.

Malcom

Deacon50
Jun 27, 2004, 03:16 AM
I have a Mega 16/15/5 motor and a Phoenix 25. Whenever I command a left turn with over 50% stick movement, with or without the aleron servos connected, my motor starts running. It happened today in a descent and again during landing. For the next 10 minutes, or so, I tested the left aileron movement and each time, it made the motor start running. Then, for some reason, it started working properly once again, (ie. left turn commanded with the stick did not make the motor run). Maybe it's a heat problem?

Hovertime
Jun 27, 2004, 01:40 PM
Deacon50-that is TX or RX problem for sure, get those looked at !

mjdoz
Jun 27, 2004, 08:35 PM
I have been using CCPHX25 with 16/15/4 and 5 motors for 12 months and have had no issues - even on 36MHZ.

Michael

GoFaster
Jun 27, 2004, 10:03 PM
No problem with Phoenix 25 with Mega 16/15/4 with NiMh or LiPo packs

RC Man
Jun 28, 2004, 06:55 AM
I could never get a Mega up to maximum RPM in the governor mode. Hopefully the new software that will be out this week will solve that problem.

Shawn Palmer
Jun 29, 2004, 10:03 AM
Kushal - set the controller for fixed throttle mode, and all those symptoms will go away.

Deacon - that's a SERIOUS radio issue there - I agree w/Hovertime in that those components need servicing.

Shawn

Hovertime
Jun 29, 2004, 02:24 PM
I just thought-maybe Deacon bought a used radio with some strange mixing programmed in it? Or a new misprogrammed radio, happens to new users sometimes;) What radio do you have?

kushal_22
Jun 29, 2004, 05:39 PM
What the hell??? This is over a year old! WATTS going on??

kushal_22
Jun 29, 2004, 05:40 PM
BTW

Thanks for the Tip on what setting to use.
Msl