PDA

View Full Version : DeWalt motor @ belt drive


John Houvener
May 23, 2003, 03:01 AM
This message from "John Houvener" <jhouve@diamondcs.net> brought to you by EFLIGHT!

14.4 motor with 3.1:1 H-1000 belt drive, all set up from New Creations. this on a 80" super cub from Paige Aviation-18 2400 scr cells-14x8 cam prop-31 amps take off power-640 watts-6700 rpm-73 watts lb-8 lb.-12 oz- 8-10 min. flights. My charger at the time would only do 18 cells. Better yet use the 18 volt motor with 21 plus cells and a 16x8 prop. Cub types do not need high pitch props- 60-65 % pitch is plenty. This model is 940 sq. in. wing loading is 21.5 oz. sq. ft.


--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
---

*** Any complaints or problems? Send an email to monitor@ezonemag.com
*** For help with list commands go to http://www.ezonemag.com/pages/mailhelp.htm
*** For the list rules go to http://www.ezonemag.com/pages/mailrule.htm