rd 6000 and csm 540

[darrell]

how do i set up my sanwa rd6000 and a csm 540 gyro i have a futaba r147f
receiver
thanks guys

darrell

[Beav]

"darrell" <darrell.flint@ntlworld.com> wrote in message
news:RV3wa.300$3E5.181@newsfep1-gui.server.ntli.net...
> how do i set up my sanwa rd6000 and a csm 540 gyro i have a futaba r147f
> receiver

Gyro into channel 4, rudder servo into gyro. Gyro gain lead into channel 5.
ATV (EPA on yours) for channel 5 set initially to 100% both ends. Set rudder
EPA at 60% on both sides.

Now refer to the gyro instructions for the gyro setup routine. it's a piece
of piss btw:-)

Once you've gone through the CSM setup, reset your channel 5 EPA to 60% for
Normal mode and 70% for HH mode, then it's about as ready to go as it's
likely to need to be for the first launch.


If you're still stuck, let us know.


--
Beav


Please note my E-mail address is "beavis dot original at ntlworld dot com"
(with the obvious changes)

Beavisland now lives at
www.beavisoriginal.co.uk

[Max_Throws]

Don't forget that the gain can be a negative and positive percentage. I had
a negative value for HH and a positive value for Normal. It was my first
gyro to set up and I knew nothing about negative gain percentages on the
RD6000. That's something that they don't mention in the csm manual either
and I was scratching my head for ages setting +60% and +70% wondering why I
couldn't see the HH gyro behaviour!
Maybe this fact is obvious to most but I certainly missed it.

"Beav" <beavis.original@ntloxoworld.com> wrote in message
news:8%8wa.317645$VV1.4668934@news.easynews.com...
>
> "darrell" <darrell.flint@ntlworld.com> wrote in message
> news:RV3wa.300$3E5.181@newsfep1-gui.server.ntli.net...
> > how do i set up my sanwa rd6000 and a csm 540 gyro i have a futaba r147f
> > receiver
>
> Gyro into channel 4, rudder servo into gyro. Gyro gain lead into channel
5.
> ATV (EPA on yours) for channel 5 set initially to 100% both ends. Set
rudder
> EPA at 60% on both sides.
>
> Now refer to the gyro instructions for the gyro setup routine. it's a
piece
> of piss btw:-)
>
> Once you've gone through the CSM setup, reset your channel 5 EPA to 60%
for
> Normal mode and 70% for HH mode, then it's about as ready to go as it's
> likely to need to be for the first launch.
>
>
> If you're still stuck, let us know.
>
>
> --
> Beav
>
>
> Please note my E-mail address is "beavis dot original at ntlworld dot com"
> (with the obvious changes)
>
> Beavisland now lives at
> www.beavisoriginal.co.uk
>
>

[christer paulsson]

on the csm webbsite you can find instructions how to set up the 540 with
rd6000 just go to the techsupport and to icg540.
"darrell" <darrell.flint@ntlworld.com> skrev i meddelandet
news:RV3wa.300$3E5.181@newsfep1-gui.server.ntli.net...
> how do i set up my sanwa rd6000 and a csm 540 gyro i have a futaba r147f
> receiver
> thanks guys
>
> darrell
>
>

[LES]

whats the web address for csm??

"christer paulsson" <heliflyer66@hotmail.com> wrote in message
news:3qUwa.416$nk5.442@nntpserver.swip.net...
> on the csm webbsite you can find instructions how to set up the 540 with
> rd6000 just go to the techsupport and to icg540.
> "darrell" <darrell.flint@ntlworld.com> skrev i meddelandet
> news:RV3wa.300$3E5.181@newsfep1-gui.server.ntli.net...
> > how do i set up my sanwa rd6000 and a csm 540 gyro i have a futaba r147f
> > receiver
> > thanks guys
> >
> > darrell
> >
> >
>
>

[Carl Farrington]

LES wrote:
> whats the web address for csm??
>

http://www.rcmodels.org/csm/