Embrace the digital wonder ---Gening Digital Servo

[harvest]

Embrace the digital wonder ---
Gening Digital Servo
Fast, Smooth, Accurate & Reliable!
Our company specializes in the research and development of digital servos in RC feild and has announced

full series Gening brand micro/nano digital servos. We can offer some really good stuff and are

currently working on some new designs. Hopefully we can release new products early next year. Our Micro

Digital Servos are both excellent in quality and competitive in price in RC world. And they have been

warmly welcomed home and abroad. We are confident that they will bring you more fun in the 3D flight and huge profits in the business world as well!

world!
You can find more in the attached document and on our website: http://www.geningrc.com

The accuracy of Gening nano digital servo(<5g，newly upgraded) can match that of D47, moreover, its speed is obviously faster than that of D47

Gening digital servos are high speed and accurate digital servos for Helicopter Gyro Operation, 3D airplanes and helicopters, and glider applications. These servos provide extremely accurate neutral position and are tailored for 3D fixed wing planes and micro electric helicopters. These digital servos can also find their position in the field of industrial automation which needs accurate and high speed control.
High fidelity MCU and excellent algorithm make it work smoothly and keep high frequency noise minimized.
The Digital Servo adopts Frequency Conversion Technology which guarantees cool running temps under wild and long time 3D flight! This advanced technology also provides lower power consumption and guarantees the durability of Gening Digital Servos. The servo has excellent performance as tail servo and can bring you lots of fun in 3D flying.



D90MG Hi-Speed Digital Servo
Fast, Smooth, Accurate & Reliable!

http://www.rcgroups.com/forums/showatt.php?attachmentid=2834586&stc=1 http://www.rcgroups.com/forums/showatt.php?attachmentid=2834591&stc=1

Specs:
Operating Voltage: 4.8-6.0 Volts
Operating Speed (4.8V): 0.09sec/60°
Operating Speed (6.0V): 0.08sec/60°
Stall Torque (4.8V): 2.0kg.cm
Stall Torque (6.0V): 2.2kg.cm
Dead Band Width: ≤3usec
Current Drain (4.8V): 5.3mA/idle and 140mA no load operating
Current Drain (6.0V): 6.6mA/idle and 150mA no load operating
Dimensions: 0.92" x 0.45"x 0.86" (23.6 x 11.6 x 22mm)
Weight: 13g
Bearing Type: Top Ball Bearing
Gear Type: Metal Gears
Motor Type: 3-Pole Neodynium Magnet
Connector Wire Length: 170mm
Operating Angle: 40 Deg. one side pulse traveling 400usec
Operating Temperature Range: -20 to +60 Degree C

Optional Turbo parts set comes with 4 servo horns and fixing screw and one spare Buffered gear
http://www.rcgroups.com/forums/showatt.php?attachmentid=2834588&stc=1
Features:
• High speed and sensitivity
• Accurate, centers well
• Full AVCS Gyro DS mode compliant
• Strong, Stable
• Metallic Gears
• Fall safe feature (Lost Signal Protection) --- The Digital Servo holds its position and torque during occasional signal lost.
• Light weight but perdurable structure will not affect the 3D maneuverability of your plane.

D90MG digital servo test video:
http://www.tudou.com/programs/view/jpG1KIEe2Fo/


D90 Hi-Speed Digital Servo
Fast, Smooth, Accurate & Reliable!

http://www.rcgroups.com/forums/showatt.php?attachmentid=2834602&stc=1 http://www.rcgroups.com/forums/showatt.php?attachmentid=2834603&stc=1

Optional Turbo parts set comes with 4 servo horns and fixing screw and one spare gear set
http://www.rcgroups.com/forums/showatt.php?attachmentid=2834604&stc=1

Specs:
Operating Voltage: 4.8-6.0 Volts
Operating Speed (4.8V): 0.08sec/60°
Operating Speed (6.0V): 0.07sec/60°
Stall Torque (4.8V): 1.8kg.cm
Stall Torque (6.0V): 2.0kg.cm
Dead Band Width: ≤3usec
Current Drain (4.8V): 5.0mA/idle and 130mA no load operating
Current Drain (6.0V): 6.0mA/idle and 140mA no load operating
Dimensions: 0.92" x 0.45"x 0.86" (23.6 x 11.6 x 22mm)
Weight: 9g
Bearing Type: Top Ball Bearing
Gear Type: Carbon-nylon Gears
Motor Type: 3-Pole Neodynium Magnet
Connector Wire Length: 170mm
Operating Angle: 40 Deg. one side pulse traveling 400usec
Operating Temperature Range: -20 to +60 Degree C

Features:
• High speed and sensitivity
• Accurate, centers well
• Full AVCS Gyro DS mode compliant
• Strong, smooth
• Fall safe feature (Lost Signal Protection) --- The Digital Servo keeps its position and torque during occasional signal lost.
• Light weight but perdurable structure will not affect the 3D maneuverability of your plane.

D90 digital servo test video:
http://www.tudou.com/programs/view/K46jJUnIAmE/

D39BB ( Equipped with two ball bearings)
Fast, Smooth, Accurate & Reliable!

http://www.rcgroups.com/forums/showatt.php?attachmentid=2834612&stc=1 http://www.rcgroups.com/forums/showatt.php?attachmentid=2834613&stc=1
http://www.rcgroups.com/forums/showatt.php?attachmentid=2834616&stc=1

Features:
Hi-Speed Digital Servo provides extremely accurate neutral position.
High fidelity MCU and excellent algorithm make it work smoothly and keep high frequency noise minimized.
The Digital Servo adopts Frequency Conversion Technology which makes servo remain cool under wild and long time 3D flight and the power consumption is rather low. This advanced technology guarantees the durability of Gening Digital Servo.
Extremely narrow dead band (≤ 3μs) realizes industry leading sensitivity.
Fall safe feature (Lost Signal Protection) --- The Digital Servo keeps its position and torque during occasional signal lost.
Full AVCS Gyro DS mode compliant
Light weight but perdurable structure will not affect the 3D maneuverability of your plane.
SPEC:
Working Voltage Range: 3.0V-6.2V
Dynamic Torque: 0.5kg.cm (7.0 oz.in)@4.8V
Speed: 0.08sec/60degrees@4.8V
Dead Band Width: ≤3us
Current Draw: Idle:0.12A; Running:0.32A; Stall:0.42A@4.8V
Servo Lead Gauge: 30#
Micro Coreless motor
Dimensions 19x17.5x8mm
Weight: 3.9g


D45BB ( Equipped with two ball bearings)
Fast,Smooth,Accurate&Reliable!

http://www.rcgroups.com/forums/showatt.php?attachmentid=2834617&stc=1
SPEC:
Working Voltage Range: 3.0V-6.2V
Dynamic Torque: 0.6kg.cm (8.4 oz.in)@4.8V
Speed: 0.08sec/60degrees@4.8V
Dead Band Width: ≤3us
Current Draw: Idle:0.13A; Running:0.35A; Stall:0.43A@4.8V
Servo Lead Gauge: 30#
Micro Coreless Motor
Dimensions 19x19.5x8mm
Weight: 4.5g

D531BB-V3 (Equipped with two ball bearings)

http://www.rcgroups.com/forums/showatt.php?attachmentid=2834618&stc=1

SPEC:
Working Voltage Range: 3.0V-6.2V
Dynamic Torque: 0.5kg.cm (7.0 oz.in)@4.8V
Static Torque: 0.8kg.cm (11.25 oz.in)@4.8V
Speed: 0.09sec/60degrees@4.8V
Dead Band Width: ≤3us
Current Draw: Idle:0.12A
Servo Lead Gauge: 30#
Micro Coreless motor
Dimensions 19x17.5x8mm
Weight: 3.9g

D541BB-V3 (Equipped with two ball bearings)

http://www.rcgroups.com/forums/showatt.php?attachmentid=2834619&stc=1

SPEC:
Working Voltage Range: 3.0V-6.2V
Dynamic Torque: 0.6kg.cm (8.4 oz.in)@4.8V
Static Torque: 0.9kg.cm (12.65 oz.in)@4.8V
Speed: 0.09sec/60degrees@4.8V
Dead Band Width: ≤3us
Current Draw: Idle:0.13A
Servo Lead Gauge: 30#
Micro Coreless Motor
Dimensions 19x19.5x8mm
Weight: 4.5g

Nano digital servo test video:
http://www.tudou.com/programs/view/2afkP_gdXxY/


D905 Hi-Speed Digital Servo
Super Fast, Smooth, Accurate & Reliable!

http://www.rcgroups.com/forums/showatt.php?attachmentid=2834629&stc=1

Specs:
Operating Voltage: 4.8-6.0 Volts
Operating Speed (4.8V): 0.06sec/60°
Operating Speed (6.0V): 0.05sec/60°
Stall Torque (4.8V): 1.0kg.cm
Stall Torque (6.0V): 1.2kg.cm
Dead Band Width: ≤2usec
Current Drain (4.8V): 5.0mA/idle and 130mA no load operating
Current Drain (6.0V): 6.0mA/idle and 140mA no load operating
Dimensions: 0.92" x 0.45"x 0.86" (23.6 x 11.6 x 22mm)
Weight: 9g
Bearing Type: Top Ball Bearing
Gear Type: Carbon-nylon Gears
Motor Type: 3-Pole Neodynium Magnet
Connector Wire Length: 170mm
Operating Angle: 40 Deg. one side pulse traveling 400usec
Operating Temperature Range: -20 to +60 Degree C

D905 digital servo test video:
http://www.tudou.com/programs/view/XYQXvzrs3dM/

Alice
Sales Manager
Email :gn.servo@gmail.com
sales@geningrc.com
Phone: +8625 5213 9546
FAX: +8625 5213 9546
http://www.geningrc.com
Gening RC Tech Co. Ltd. (china)

[RonR214]

interesting, but what are prices, shipping, will there be a distributor in the USA, etc. Web site does not give any pricing or shipping info and looks like min quantity is box and alternate is ton. I hate to think how many of these servos it would take to build reach a ton of weight.

Ron

[Challenger 413]

Hobby City use to sell them, I bought (4) of the "37's and they seem to work good. Not sure why they stopped selling them...

Challenger413

[harvest]

interesting, but what are prices, shipping, will there be a distributor in the USA, etc. Web site does not give any pricing or shipping info and looks like min quantity is box and alternate is ton. I hate to think how many of these servos it would take to build reach a ton of weight.

Ron
hello sir, thank you for your interest in our products. this is Alice, sales manager from Gening RC, please contact me if you have any problem, i will get back to you and answer your question as soon as possible. we can provide you with the more detailed information of our products if you want, my email address is gn.servo@gmail.com. thanks again!

[RonR214]

Alice, ;thank you for responding, but just want to know what the prices per servo are, what are shipping methods and cost and do you have a USA distributor that we can purchase from?

Thanks,

Ron

[harvest]

Alice, ;thank you for responding, but just want to know what the prices per servo are, what are shipping methods and cost and do you have a USA distributor that we can purchase from?

Thanks,

Ron

hi Ron，thank you for your attention to our products, do you have an email address?, i will send you the price list of the servos, and tell you about the shipment and cost, i wonder if it is ok that we keep in touch by email? looking forward to your email, mine is gn.servo@gmail.com

Thanks,
Alice

[harvest]

D39BB,D45BB price list
D39BB,D45BB nano digital servo(<5g，newly upgraded) can match that of D47, moreover, its speed is obviously faster than that of D47



http://www.rcgroups.com/forums/showatt.php?attachmentid=2881298&d=1258463649

[E-MO]

If you cannot answer Ron's question in this thread for all to see then this is not the place for you to try & sell your product.

[harvest]

we can deliver our products to the US by EMS or DHL.as for the postage, it costs 16 USD with the parcel's weight within 0.5 kg, and 20 USD for parcel within 1 kg. as for the payment, paypal is preferred when the total value of the transaction is within 1500 USD.

Thanks,
Alice