The new thin wing servo for glider

[kin]

The new thin wing servo for glider from Hyperion and the price is very attactive 55 .

[nuevo]

just passing along a little info from google

Here's a web page selling them.
http://www.allerc.com/product_info.php?products_id=4746

Selected spec's
Weight 18.0g (.63 oz)
Dynamic torque Kg/cm 4.8/6.0v 4.0/4.5 (55 in-oz / 62 in-oz)
Dimensions mm 31.5x9.5x32.7 (1.24" x .374" x 1.29")

[Paul Garnett]

Has anyone used these servos, Thinking they may suit my new Skorpion needle 100"...

[daleksw]

Haven't used that particular one, but I have used the Hyperion DS11AMB on the tail feathers of a New Sting. You'll also find the F5x guys love the tiny DS09 series for their ailerons. That'd be a candidate for a needle. They're all excellent quality devices.

In the UK, get them at http://robotbirds.com, or possibly http://www.hyperion-eu.com/products/

[dhauch]

i've been using the smaller DS11's & DS09's in hotliners and small slopers and there great.

dual ball bearings, metal gears, digi, lots of torque, and there super tight.

dave hauch www.rc-builds.com

[SmokinJoe101]

The new thin wing servo for glider from Hyperion and the price is very attactive 55 .

Nice looking servo and good stats for a wing servo , Hope to hear a good

BUZZzzz about the servo :eek: ,,, just had to say that


sj

[OVSS Boss]

Kind of looks like a JRDS 168 from what I see.

Marc

[djklein21]

I don't know Marc, it looks more lie a hitec 5125 to me. :)

[PDX Slope Pilot]

I've had excellent results with the digital DS09 in my smaller slopers as well. Hyperion designs their own stuff so I doubt these are knockoffs.

[wakumann]

Hi Vic

this must be be knock offs, they are also square and black ,lol. :) :rolleyes:


Maybe it would be a good idea for some to read tech. specs before they make 'kind of looks statements'. :rolleyes:

http://www.aircraft-world.com/shopexd.asp?id=6718

They not brand new neither, 3month already on the market.


Cheers
Thomas

always edgy after a 10 hr drive

[fnnwizard]

I have heard great things about this servo and many other Hyperion servos actually. The torque spec (@6v) is huge... 62.5 oz/in and holding torque is double that!

I can't believe stall current to be "only" .9A though unless that is current at dynamic torque. What's the max current the servo will draw? Anyone test this servo yet?
Thanks.

[satinet]

jr graupner has started to rebadge these hyperion servos.


This is also called the "graupner DES 448 BB MG"

Although I think the hyperion range is made by inolad. or they are rebadged again........