What´s your CG on your flying CMPro Ventus ?

[zymox]

Since i didn´t get any answers in the building thread I ask again here,
What CG do you have on your flying Ventus from CMpro ?

My instruction sais that the CG should be 55-58mm and my brothers instructions sais something else so thats why I´m asking.

In the building thread everyone has it´s own favo. spot so I´m trying to figure out a averege...

[davidjensen]

There are several posts in the thread on the correct CG. I found 49 to 50 to be the sweet spot. You can go to 52 but that is the back of the safe range. I started at 47 and moved it to 50 and it flew better without the up elevator trim showing on the elevator. Look at page 13 of the Ventus thread for more info on CG and flight reports.

[wds]

Thanks David.

Bill

[zymox]

Thanks David,

I´ll go with your settings then and just ignore my instruction for a start.
Don´t wanna wreck the plane at the first throw...

BRGDS Zymox