Neutron Rx - Where is my 6th channel?

[Rob_P]

I have purchased the dual conversion 6 channel Neutron receiver.

Its sold as a 6 channel receiver but only has connectors for channels 1- 5 and battery.

If I want to use the 6th channel for my flaps, where do I plug my receiver battery in?

Rob

[vhoward1122]

Use a Y harness and plug the battery into one of the ends.

[Rob_P]

I'm already using a Y harness on channel 6 to operate my two flaps.

[MikeMayberry]

You can use any open channel (ch5?) or another y-harness on any channel for the battery/switch.

Mike.

[Rob_P]

Thanks guys, I plugged my battery pack into channel 5 and it works OK.

I thought that might be the case but was reluctant to try that in case I was wrong and let the smoke out.

Rob