Mike St
Jun 30, 2009, 10:28 AM
I got the Dragonus PLus Rcer 35A esc to work. On a lark, I discovered it won't spring into action unless the throttle is programmed. I followed the programming instructions: Put the transmitter on, move the throttle to the
top, then connect the battery, and wait for 2 beeps, then move the throttle down, and the throttle will then function. The ESC was supposed to play a tune after programming but never did. I think it will work. I programmed the brake off with three beeps. This is the first esc I've used that needs to be programmed before working. Mike
top, then connect the battery, and wait for 2 beeps, then move the throttle down, and the throttle will then function. The ESC was supposed to play a tune after programming but never did. I think it will work. I programmed the brake off with three beeps. This is the first esc I've used that needs to be programmed before working. Mike