ClearView- helicopter roll rate increase

[rudyy]

In the real world, the roll rate can be achieved by increasing the aileron cyclic response i.e. more aileron servo travel to give more pich throw.

In the Clearview simulator, how can increasing the cyclic response be achieved to increase the roll rate?

Thanks,

Rudy

------------------------------------------------------------------------
aelFlybarDelay 2.5
aelSlopDelay 1.0
aelSlopPoint 1.0E-4
autoDownGainCoef 35.0
autoExtraGainCoef 0.0
autoLowRPMGainCoef 50.0
backLeftSkid 0.12 -0.2 -0.12
backRightSkid 0.12 -0.2 0.12
bladeLiftCoef 1.0
bladeMass 0.1
conningCoef -0.01
cycExpo 0.5
cyclicPower 40.0
deltaAngle 15.0
dragArea 0.6
dragCoef 0.2
elevFlybarDelay 2.5
elevSlopDelay 1.0
elevSlopPoint 1.0E-4
endZoomDistance 100.0
energyCoef 0.04
fieldOfView 40.0
fieldOfViewFar 28.0
fieldOfViewNear 39.0
frontLeftSkid -0.24 -0.2 -0.12
frontRightSkid -0.24 -0.2 0.12
governorMainRotRPM 1500.0
governorOn 0.0
groundEffectCoef 0.0
groundEffectLevel 0.0
groundLevel -0.21
gyroGain 70.0
gyroStopDelay 2.0
gyroStopPoint 0.3
gyroTailPowerCoef 50.0
gyroTailSlopCoef 0.5
gyroType 0.0
headDampDelay 10.0
headDampPoint 0.3
headFlexCoef 1.0
hiPitch 10.0
initModelPos -4.19 0.02 -5.224
initModelRot 0.0 -0.5235988 0.0
loPitch -10.0
mainBladesCoef 0.0050
mainBladesDiam 1.7
modelIsElectric 0.0
modelType 0.0
modelWeight 4.6
pitchCurve1 -4.0 0.0 5.0 8.0 10.0
pitchCurve2 -10.0 -5.0 0.0 5.0 10.0
pitchUpCoef 0.0
rotorInertia 40.0
rotorLiftCoef 0.3
rudExpo -0.25
rudServoDelay 8.0
rudSlopDelay 1.0
rudSlopPoint 2.0E-5
servoAelBandWidth 0.01
servoAelSpec 0.12
servoAelStopDist 0.2
servoAelType 5.0
servoEleBandWidth 0.01
servoEleSpec 0.12
servoEleStopDist 0.2
servoEleType 5.0
servoPitBandWidth 0.01
servoPitSpec 0.12
servoPitStopDist 0.2
servoPitType 5.0
servoRudBandWidth 0.01
servoRudSpec 0.12
servoRudStopDist 0.2
servoRudType 5.0
servoTroBandWidth 0.01
servoTroSpec 0.12
servoTroStopDist 0.2
servoTroType 5.0
setupComplete 1.0
skidScale 1.0
smokeExostPoint 0.25 -0.25 0.08
smokeExostVect 2.0 -1.0 0.0
specialMode 0.0
startZoomDistance 1.0
tailCrashSpeed 5.0
tailEnd 0.9 -0.1 0.0
tailPitchCurve1 0.0 0.0 0.0 0.0 0.0
tailPitchCurve2 0.0 0.0 0.0 0.0 0.0
tailRotorCoord 0.93 0.03 -0.04
tailRotorPower 40.0
textureMode 0.0
throtCurve1 0.0 0.3 0.5 0.8 1.0
throtCurve2 1.0 0.85 0.75 0.85 1.0
thrustVector 0.0 1.0 0.0
topAutoRPM 2000.0
topMainRotRPM 2000.0
topTranslationalSpeed 10.0
torkAccCoef 1.0
torkRotCoef 1.0
translationalThrustCoef 0.0
useModelInitPos 0.0
verNumber 0.0
vertAngle 0.5
vertCrashSpeed 5.0
weathervaneCoef 1.0

[skirtz]

>In the real world, the roll rate can be achieved by increasing the aileron cyclic response i.e. more aileron servo travel to give more pich throw.

The same in ClearView - go to Easy Setup and increase the throw. Please update to ver. 5.02 - you are showing parameters for older flight physics that is not used anymore.

Stefan
http://rcflightsim.com

[rudyy]

How to update to the latest version? Do I need to uninstall the current one first?

[Helos36]

Yes you will have to uninstall current version...If you have custom models they will be left in the models folder...copy them to a safe place on your hard disk then delete the SVKSystems folder. Then download the newest version, set up your controller and re-calibrate. The license is hidden within the system registry so your license will not go away unless you wipe your hard disk for a fresh reinstall of windows. Uninstalling and re-installing Clearview will not cause you to lose your license.

Ken