NEW Groovy 3D EP Electric Plane Kit

[szewang2805]

Swanghobby.com has Groovy 3D EP Electric Plane Kit now.

http://www.swanghobby.com/images/cache/free-shipping-f2abc20ef8091828a8df0760782b8d6e.jpg

http://www.swanghobby.com/product.php?productid=1063&cat=0&page=1

Groovy 3D EP Electric Plane Kit (http://www.swanghobby.com/product.php?productid=1063&cat=0&page=1)

Please check www.swanghobby.com

Feature

- Aerobatic park flyer fabricated with top quality balsa and plywood

- Covered with genuine heat shrink World Models' LighTex covering

- Strong wood structure and tough covering give the airframe the best load to weight ratio

- Full house controls ( ailerons, elevator, rudder and throttle ) extend maneuvering limits

- Strong and light pre-painted fiberglass cowling

Specification

- Wing Span: 39.5 in / 1000 mm

- Wing Area: 305 sq in / 19.7 sq dm

- Flying Weight: 25.5 oz / 720 g

- Fuselage Length: 39 in / 990 mm

- Requires: 4-channel radio w/ 4 micro servos, Outrunner Motor KM0283010 w/ Propeller Adaptor HW2340100, 20A brushless ESC, 3 cells 11.1V 2100mAh Li-Polymer battery & charger

[brianchristie]

Me and a few friends purchased these at the AMA show in January for $50!
Mine's still not completed, though. I haven't had the time. The elevator push rods are really tight in the sleeves. I need to get smaller diameter wire.