Jerry Hale
Apr 18, 2009, 06:45 AM
When I used my model boat this spring, the prop is spinning the wrong direction! Pushing the throttle stick up gets high speed reverse, with the red "reverse" LED lighting. I can get idle speed forward (and no reverse LED lit) by moving the trim slide down, which used to produce slow-speed reverse.
No wiring changes were made over the winter, and the prop was not removed or anything. What do I do to get back to proper operation? Servo reverse on TX does not help--I get same result, just with inverse of stick positions. I see forward/reverse arrows indicated near the LED light, but no switch to change that seems to be on the controller. Am I missing something?
No wiring changes were made over the winter, and the prop was not removed or anything. What do I do to get back to proper operation? Servo reverse on TX does not help--I get same result, just with inverse of stick positions. I see forward/reverse arrows indicated near the LED light, but no switch to change that seems to be on the controller. Am I missing something?