Castle Phoenix 110 mounting.. Let's see yours..

[Tram]

Hey guys-

I'm getting ready to mount my 110 and I'm just trying to brain storm ideas and thought I'd see how others had done it.

I'd like to mount it on some stand-offs to allow airflow around the entire ESC.. :)

So..

How'd you get'r done?

Jeff
www.CommonSenseRC.com

[rogerchr]

Hey guys-

I'm getting ready to mount my 110 and I'm just trying to brain storm ideas and thought I'd see how others had done it.

I'd like to mount it on some stand-offs to allow airflow around the entire ESC.. :)

So..

How'd you get'r done?

Jeff
www.CommonSenseRC.com

I usually just tiewrap the ESC right to the motor box with a couple holes through the corners of the box but this would work with two or four tiewraps to standoffs attached with 1 1/4" screws to the box.

[Staggerflyer]

This is temporary, right now, but is generally how it will mount.

http://www.rcgroups.com/forums/attachment.php?attachmentid=2489966

I'm getting closer to final mount, may shorten motor leads and mount it with motor leads pointed up. Cowling air outlet is right at bottom of tray. I may put small block between tray and ESC. Biggest problem is that I have to use a velcro strap across front of tray/ESC to hold tray in place.