View Full Version : Discussion Walkera 60
Dockhead
Feb 26, 2009, 10:56 PM
I have not been able to get my walker 60 off the ground without breaking something. As soon as it takes off it starts going around in circles. any help would be great
jaydon134
Feb 27, 2009, 08:38 AM
If mine had done that I would be very happy. Mine wouldn't even get light on the skids. I sold mine on ebay for a reasonable price.
daybyter
Feb 27, 2009, 12:02 PM
Check, if the gyro works in the right direction. Just turn the heli a bit while holding it in your hand (while the motor does not run) and see if the tail servo works ok.
bikemad
Feb 27, 2009, 07:29 PM
how fast are the circles, fast ones are the revise on the giro slow ones are a set up problem, are you on HH or normal, have you tryed triming it out, wach out for a brass bit on the slider on the tale coming lose, it's part of the slider and runs on the shaft,
Dockhead
Mar 04, 2009, 12:49 AM
could it also be interference? My neighbor has high powered cb radios that he is on a lot and could that make my servos jump and cause the giro to not operate correctly? Thanks everyone for your help, I'm still waiting on my replacement parts and will test it when the parts come.
robtangie
Mar 04, 2009, 11:45 AM
There are some very walkera savy guys gathering at a new forum. I hear they are welcoming new members with a free heli drawing that you can get a chance to win every new member you bring to the forum.
You walkera guys would fit right in there and the 60 is one of thier favorites.
Have a look, http://rcfriends.createforum.com/forum.html
All are welcome,
vBulletin® Copyright ©2000-2009, Jelsoft Enterprises Ltd.