- Tanic Beta's the CELL PRO 10S
- Cellpro Multi4 Announced
- **HOT** FMA/Revolectrix Announce CoPilot-II - Spring 2009 - $250 USD!
- FMA CoPilot- II getting one
- Welcome!
- CP10 recalibration
- Cpii
- Charged mAh accuracy
- Cellpro 4S
- Custom skins for your charger
- Help Me Identify This Cell
- Any chance of getting Mac Software?
- No blocker plug message when trying to charge through discharge leads.
- "pack removed" on multi4
- TP adapter
- CellPro 4 Balancing connectors and Pigtails
- How to know which Multi4 preset settings are valid
- Charging Two Same Packs in Parallel on 10S Charger
- Cellpro transmitter battery
- Multi4 Custom Fuel Table Creation
- Multi4 no data from charger
- Copilot and Futaba 10C?
- Trimming w/ CPD-4 Co-pilot
- german distributor?
- Fried Cellpro 4S?
- CellPro 4S poor balance connections
- Nixx trickle charge preset question
- Cp II
- CPD4 vs Co-Pilot II on FP heli
- CellPro DPM LED/Speaker module?
- how can i tell if fma copilot 2 is turned on ?
- Charging at >1C
- Location CPD4 on AoA Pitcairn autogyro
- cpii with belt cp
- Thoughts on CPD4 for student-built foamies?
- Does the Mini 5 work with 3s lipoly?
- CoPilot II Noob Question
- NI MH and Cellpro multi4 question...
- Strange Co-pilot2 programming problem
- 10S manual
- Cell Pro 10 S with 2 batteries
- Help me out with this idea pls
- 10c
- FMA Specials
- Co-Pilot / Outside Loop
- Bad cell count!
- Simple charge question
- Small non balanced packs
- What 2.4GHz technology in the new RTFs ?
- Announcing the FMA Direct Model Shop!
- CellPro 10S firmware
- Low charge current
- Mixed feelings about FMA & my Original Co-Pilot.
- CP10S Charge 2 x 5s
- Upgrading 10s input power cords
- Co-Pilot and Flybarless Systems
- CellPro 4S Charger
- Co-Pilot II stick priority
- A123 receiver pack
- Charging series-wired packs - be careful ! ! !
- Multi 4S Programming wish.
- Problem with original Co-pilot
- Calibrating CPD4 on a slope
- Doa
- FMA 10S Charger "Storage" charge....
- Cellpro 10S 15A fuse
- Interpreting CP10 Lipo Cell IR Variations
- Roll-axis sensors not responding
- CellPro 4sacting strange
- Need help with CPD4 on student foamie planes
- Original Cellpro 4s Charger Returns
- Multi4 and 6volt SLA?
- Awesome Customer service
- Future Product
- FMA 10s