- Calibrate Altitude sensor question
- wrong mAh on PowerPanel (2x higher than real)
- Latest version of Airspeed module
- Stand Alone Airspeed Sensor
- Stand alone Altitude Micro Sensor V3
- Return-To-Home Autopilot Expander
- Gps
- Error Code 161
- Eagle Tree OSD
- Magnetic Sensor - RPM
- Configuration Problem
- Seagull range only 60yds and even then only intermittent
- Can't download firmware update from website
- V3 elogger setup with glow model
- signal loss
- eLogger V3 - some remarks
- Switch Altimeter V3 to metric and get correct data?
- set up for 1/5 scale on road
- editing GPS data
- V3 - Mah readings not accurate
- Jet ECU data storage issue
- seagull dashboard problem after firmware update 4.68
- Spektrum Data Interface on V3
- Micro Temp Sensor < 0C
- Strain sensors for wings
- Stand Alone Altimeter V3
- Grrr "No Signal" on glider dashboard
- Eagle Tree V3 Mounting Temp Sensors
- Add text version of GPS UTC to .XDR files
- OSD Pro
- Brushless RPM settings Question
- Capture rate
- Problem with PowerPanel display for V3 Altimeter
- How do I post graphs into rcgroups?
- Mystified by e-Logger V3/software
- Bad Powerpanel
- Temp Sensor Adhesive
- Chart Editor - help
- V3 with altimeter, output not as expected
- non-zero RPM readings when the motor is not turning or when connected to battery
- Suggestions - OSD Pro
- OSD Reports Settings then overlay disapears: Solved!
- Sensors not working. Help please.
- Eagle Tree Website and Email UP now :-)
- V-3 Logger Panel extenion
- V3 and airspeed sensor dont talk.
- PRO or Standard Version
- Need help with Eagletree Brushless RPM setup
- Eagle Tree 10% Rebate
- Voltage Errors on Micropower
- v3/powerpanel - over-current?
- Wireless Pro Transmitter cause servo chatter
- Power Panel issue
- Spektrum Data Interface on V3 shows 56K fades
- Eagletree Battery Power Requirements
- artificial horizon
- Fuel Monitoring/Flow
- Monitoring NON-PRO with PRO Dashboard
- odd headspeed data?
- Dead eLogger V3 ??? (led constat on)
- Battery Power For Wireless
- Do I have a bad brushless sensor
- Dual AD expander resolution
- EagleTree GPRS settings?
- Seagull range problem
- Firmware 5.43 has no option for brushless rpm sensor
- Malfunction with capture rate 1 per minute and 1 per 5 minute
- When to use external bat and harness.
- Wireless Tx/Rx speed?
- Thanks to EagleTree..
- Altitude sensor on a heli.
- Altimeter Sensor V3
- ERR Receiver not found
- Brushless RPM Sensor issues
- OSD error message