PDA

View Full Version : Electric Motor Design and Construction

Pages : [1] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
  1. cd-rom tricks
  2. group order: 40mm dia,18slot laminations. Turned parts can now be ordered.
  3. 3 different stator sizes project
  4. DIY 35mm brushless motor
  5. DIY motor tools and parts sources
  6. Show your CD / self made motors
  7. 300-400W Motor Kit for Heli.
  8. no cogging in CD motor
  9. First Motor Build, And Got A Slight Problem
  10. Brushless and the disc brake
  11. Newbie questions.
  12. Different mounting hight of the same stator
  13. Neodimium magnets magnetizer
  14. Can a DIY Motor Perform As Well as a Mfg'd Motor?
  15. magnets touch the bottom?
  16. replacing ferrite magnets with Neodimium what are the gains?
  17. Anyone run Eflite 370-1320kv on 3s?
  18. Winding 130's
  19. Looking to build my first motor...
  20. What makes cdrom motors different from commercial ones?
  21. Mega 16/15/4 equivalent. Is it possible to do?
  22. CD-rom motor-test-stand
  23. Large custom inrunner BL motor build, parts from Applimotion INC.
  24. Re motor building
  25. Brushless Motor Sine Wave
  26. CD rom motor probs
  27. Nano Outrunner - This belongs to here....
  28. Monster stator
  29. 20mm backplate cd motor
  30. 1g stick mounts for CD-Rom motors
  31. Ac-diymot-vl
  32. Generator - this should work right?
  33. Can one have to much magnet?
  34. 32mm outrunner!!
  35. 2 stator brushless:)
  36. Wire Size..
  37. What do I need?
  38. CDR for E-starter? (x-posted from power systems)
  39. Wire size comparisons - best winds?
  40. Max current draw for a 380 or 400?
  41. Brushless ESC setup
  42. Gobrushless 25mm?
  43. CNC Bragging rights
  44. Super simple stator coil protection!
  45. razor motors
  46. rewinding a brushed motor into a brushless
  47. Rewinding Outrunners
  48. Wire....
  49. 550 Motor 3 Turn - 18 Gauge - whatcha think ?
  50. What's happening with my cdrom motor?
  51. help with stepper.
  52. Winding direction realization
  53. Need motor advise
  54. ? for choosing New Motor/thrust
  55. Running an out runner motor under water?
  56. Brushless Collection
  57. What do all the numbers mean?
  58. proposed sticky thread
  59. Home made
  60. 8 Poles Stator
  61. convert a novak bl to sensorless
  62. Komodo motor newb question
  63. How to attach magnets to GB type motors?
  64. Bronze bushings in 3x6x2.5 - where to buy?
  65. eddy current effect demo videos
  66. Why brushed motors for high current appli?
  67. Hard Disk Stator
  68. multiple brushless
  69. Linear motor theory
  70. 5 Phase Unipolar BLDC Motor
  71. Frist go brushless, frist hook up thougts
  72. 71 mm 12 tooth Stator and can!!!
  73. Look at this company, 98mm BL motor
  74. My first wind worked!
  75. I just ordered a MPI wattmeter...what is the proper test setup?