- Winding(motor) theory
- Rewound Motor Screeching
- Jeti Phasor 30/3 specs?
- Komodo 257 Problems
- I Made a cdrom motor,what numbers should i excpect?
- 6mm x 6mm x 2.5mm?
- Who carries or builds large Outrunner motors for industrial use?
- Is silver worth it?
- Waypoint 2208/34T Rewind
- Multiple motors
- Differing wire gauges on multi-strand wind...acceptable?
- Sharing a neat little wire specs app I found.
- Powerfull motors.
- Help lining up magnets???
- Flyboy/found new stator material
- 2nd CD based motor build...not as satisfying.
- DIY - 400-500 Watt Outrunner
- Very strange test results on an outrunner
- My 2nd Stator
- why not use square wire
- Dr Kiwi
- gobrushless double help
- E-Flite motor wires
- rewindinding 12 pole 2205/15 gws
- Magnet strength question.(opposing poles)
- How to DIY the outrunner motors
- GBv1.1 Combo for 100mph pitch speed?
- opps
- Wind on LRK
- Need to shorten motor leads
- Suggestions please
- Gear pinion for EasyGlider
- Don's rc 450 motor
- big outrunner build
- Does this motor need more magnets?
- Wire Guage substituition chart.
- DIY Inrunner
- shorten the motor shaft
- My Gbx single stator burned off!!!
- Upgrade to brushless
- GBv motor configuration help
- Can someone shed some light please?
- actro 32-3
- Brushless moters
- Wire strand chart
- Replacing a Motor Shaft
- Need help - GBx Tripple ? on turns
- DC to Outrunner Tail Motor Conversion
- How to remove the shaft?
- Rimfire 42-60-600 core for sale
- Stealth and running two motors
- EDF Motors
- APOLLO-25 Electric speed controller
- n00b help: GBx Double problems/mystery.
- No success with multi-strand wind. :-(
- What exactly is Break on/ off/ soft break etc
- Measuring current with an ammeter
- Tower Hobbies Speed 280 BB – Part# GPMG0305 - $15.99
- Hyperion reverse mount
- GBx Tripple - Stator to Bearing Shaft
- Question on neu motor 1912 1.2y?
- Two Wires Brushless Motor (2wBL)
- Best stator??
- Brushless Equivilents
- When is it worth rewinding?
- Stuttering
- Dualsky X200(B) modification
- The effect of stator material (and dimensions)
- okay to run motor backwards?
- I've got a lot of drives.
- how the @#*$ do you get these things off?
- Two brushless motors variable speed
- Help with a 2910 rotor rewind
- New Performance Database
- question