- Mylars
- Vacuum System Building Thread
- Rhino - Help
- CA Disolver Clean-Up
- Which pump to pick
- Two new wings.
- Duplicate fiberglass cowl?
- PU Glue vs Epoxy for FG and Vac Bagging
- Su-27
- quick help! yellow hardener!
- Opps!! It happened again!!
- Video on home infusion molding
- Lost foam question
- two piece mold help
- Looking for hands on help in WA
- BWB Airframe
- Wing layup recommendation
- Question about Phil Barnes DVD and 3 meter tail
- Speed canard build
- 50GSM pre-preg kevlar?
- Cheapest Composite Fab Materials!!!
- building shock absorbing gear for my cub
- Silicone Rubber Mold Inserts/plugs/presses
- Epoxy problem, soft when hot...
- Slightly OT - What are these fabrics?
- Almost an entire plug down the drain!
- Need some Booms made
- Making glass canopy frames.
- Colored Carbon Hybrid Fabric Pictures & Use?
- Beginner Vaccum Bagging advice.
- Whats your favorite glass cloth
- Polyester Resin bonding after curing
- Alternatives to Kevlar for skin hinges?
- Fiberglassing basics
- Precured Uni carbon for sale
- Mylar Substitute ???
- Vacuumed Boat Mold from finished Plug
- Herex
- Joining Hollow Core Wing Halves?
- composite zagi
- Phoenix area - composite master
- Pa-49 Payan Katy
- If it hasnt delaminated yet its okay?
- Repairing fibreglass fuse
- I need 4mm I.D. Carbon Fiber Tube
- Milling Root Ribs (Under 30 Seconds Each)
- can you machine a mold (practically) out of any other material than....
- Spinners from Scratch
- Composite wing joiners and tubes
- Alternatives To Krylon Paint???
- Molded fuse without taped or gasket seam?
- Touch up painting bagged wings
- Old Pod Molds
- laminating epoxy vs. hobby shop expoy
- how to cover a bb60 rc aeroplane in glosstex aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaah!
- The Su27 has flown!
- Looking for cnc foam cutter
- i can supply chopped strand mat
- pre-fab composite wing skins
- CNC foam cutter
- Epoxy or polyester resin?
- Fuse cutting via CNC
- What is a good way to secure servo covers on a plane?
- How do I fix tail feathers with paint acne
- Source for Lightweight Kevlar cloth
- What resin is good for a tooling coat during mold layup?
- Help dimensioning a bagged 2.5m wing
- Tapered tail booms
- Construction help with new wings
- Composite spars?
- GP siren Carbon Fiber!!! HELP!
- Need 13 ft fuselage plug/tool
- Help with Rhino and maybe more!
- Carbon fibre hood
- Materials (tubes) with specific strength greater than carbon fiber?