- E-sky Lama Tx with USB cable prcission problem
- gluing your blades in place??
- xrb deal !
- CX is a submarine
- Lama V3 on Floats
- New Problems-Blade CX
- Outdoor Flights run battery down quicker?
- Esky Lama v4
- Lama V3 and Extreme Painted
- Onboard Video/Livingroom flight
- Trouble getting the tail to hold on Lama V3
- Phoenix Heli
- battery for Lama question
- Aluminum upgrades for BCX - Tangible benefits?
- Spontaneous 4-in-1 IC burned - is this commonplace?
- Thinking about ordering one of Jamie's booms.
- Should I buy a Walkera 5#6?
- Blade protection
- Uh oh, just thought of something about my Lama and Xtreme part???
- Lama V3 not lifting up higher than 400mm.
- Another Newbie
- Is the micron CX 3.7 a good quality heli?
- How long do LIPOs hold their charge on the shelf?
- Lama V4 & Extreme Blades - IMO
- unable to get esky lama control board to arm with spectrum reciever
- (BCX) How the heck do I remove outer shaft gear from frame?
- Does a dead CX2 4 in 1 = a viable AR6100?
- Red 5
- Charging Error on CX-2
- not to be a paid advertizer
- New Helicopter - Eurocopter EC 135
- Checking individual cell voltage on a Esky Lama Lipo
- Can I transplant stuff from my V3 LAMA to...
- servo going crazy....?
- CX2 4 in 1 transfer to Honeybee FP
- New Walkera Model
- Cheaper X-UFO brushless upgrade!!!!
- Lama help needed
- BCX2 fuse mod?
- V3 Shaft Change
- Shaft Movement on BCX2
- What makes the multi rotor helis so easy to fly
- Paint type for Lama
- best one for the money these days
- 4 channel co-axial at FRY's ELECTRONic
- Some Lama V3 newbie questions
- Boredom + Dremmel = Body Mod
- X Ufo All Lights On
- Pics of a Modified CX 2 Pro
- Xtreme flexy tail for Lama v3 - what glue to use?
- stock lama4 motors versus xtreme's
- Feeling down.. How to replace swashplate on Walkera 5#6?
- Blade CX2 help??
- Old CX issue...
- Helps for project : weight of the esky LAMA 4 in 1 ?
- How to use walkera radio with other one ?
- futaba 4exa
- Graupner Co-ax Jetranger...?
- Lucky
- CX2 turns one direction wayyyy faster than the other.
- Lama outer shaft
- Starter Heli For OUTDOOR Use Only !!
- not only the MM is a time sync...
- 'catch' in lower rotor - esky lama 3
- CX-2 charger
- inner shaft question
- Hobbico Saber Strike Heli
- Crazy Lama Servo
- How to change swashplate on the 5#6?
- Tuning Question
- Balancing a Lama Stock Battery pack
- Lama 3 transmitter sticks not comfortable?
- Lama v3 - Really unstable after aluminium upgrades
- Upgrading from heli.
- lama v3