- Tensor motor mount set-ups
- what the heck were these called?
- Fliton "Quiet Storm" stockist in the UK
- How do you install Landing gear on a foamy?
- Last hover of 04
- maidened my Slick3d
- 280/5 LRK or Himax 2808-0980?
- new to 3D question?
- PA 2005 new release - KATANA MINI electric ARF
- 3decipher build thread
- Prop for Axi 2204/54
- happy new year
- Airwave Sukhoi 31 ~Vs~ GP Sukhoi 31 ARF.
- new way to make hinges
- What plane to buy
- First video of the Tensor...from just a regular, no pro..
- help! whats a good (inexpensive) 3d plane?
- Super Star Shock Flyer
- Recomended ($economic$) Brushless Setup for: 1200 2cell etech LiPoly
- Eflite Props
- Which Servos Do You Trust With Your 3D Plane
- 32" Funtana for indoor
- Which Receivers Do You Trust With Your 3D Plane
- Another Tensor thread
- Tensor 4D Radio/Castl Crtns Setup Help
- Eflite Ultimate 3D suggestions (power system)
- does the tensor need an outrunner?
- Depron supplier in San Diego
- Some Tantrum Questions
- Honey I Shrunk The Tensor!
- 23" Tubberon biplane for CDROM motor
- Direct drive vs gearbox--which is preferred/better?
- Newbie 3D pilot
- lipoly problem?
- i need an airplane for an axi
- "Stupid" flying video...do NOT condone...LIMITED TIME ONLY
- Does anyone know?(3DX question)
- Shocked Dr-1
- Brushless...but which one
- Tuff E directions
- Foamy Factory 300 SX
- Tensor with eflm1200?
- Economical Souce for Depron?
- New Sorta Tensor Plans
- building 3Dfoamy raven
- Mini Funtana - Quick Build Part 2
- How do you have your radio set on the..........
- Shock Flyer Stock Setup Question
- Keep the U-CAN-DO or buy a new plane.
- Servo stuck briefly - junk it?
- canīt find GP Yak 55 3D Video
- hitec 55s numbers
- Hitec HS-55 vs HS-56...
- Chip Hyde's 4play
- Chip Hyde's New Foamy
- Shock Flyer Radio Set Up Suggestions ?
- Tensor 4D Motor choice?
- The Judge" Edge 540 3D Profile
- Ikarus Yak 54
- 3D Plane settup video
- Post your TENSOR motor/battery set-up
- Am I ready for 3d?
- How thich is the tensor 4d?
- Big problem power system choise.!!
- littlescreamers can do video
- Servo installation: E-flite Ultimate
- Anything other than Carbon rods?
- If I have a 21.8 oz plane {total weight with components}
- Miss June battery tray help
- "Y" VS "MIX" (ailerons)
- Why does every single foam profile 3d plane
- Some ?'s about the best gobrushless setup for a shockie
- Astro 020 motor cc35ESC What is the Best Plane for this Combo
- Need a plane for AXI 2208/34.. Not a shocky. :)
- e-flite ultimate help