- Just got rap 50...what battery pack?
- Home made Raptor canopies?
- What kind of weight change does it take to make a difference on RappE?
- corona , tail question
- where to buy Eolo MS 395 mains
- Stupid Eco-8 Tricks
- And they call it PUPPY LUV... (Corona)
- Define vibration - do I have it?
- Corona Acrobatics
- LMH Cobra and new crutch flight test A-ok
- Looking for shim tubing for a heli...
- 120 or 90 dergee CCPM for RappE?
- Logo 10 pilots in the DFW Texas area?
- Hacker B50-15XL vs 16XL revisited
- Palo Alto Indoor FunFly?
- Logo10 Alu-Swash question
- Lehner motors in helicopters?
- Need to get in touch with Albig
- Raptor Gear Mesh
- hop-ups for Voyager E: intermediate gear, tail pitch link, blade spindle shaft?
- CF Tail Fins for Corona. . .
- 90 Degree CCPM
- One man's Rappy CCPM interpretation.
- My Corona is going brushless!
- No time...Need some help with Voyager E
- Electraflight Raptor CCPM Setup Help Required
- Sanyo 2400's in another heli?
- I knew he was good, but jeeezzz
- Best Heli ESC for B50-18S
- Corona on eBay. ..
- Need Corona Help
- Holy cow! I just saved my Logo!
- Corona landing gear width?
- motor/esc wire?
- Where did the Megas go?
- European Heli Dealer
- Concept EP SR+Hacker C40-14S+16T+Schulze He35+CFKmain Blade:you have tried 10cells???
- New Darth's LMH Website
- eco8 landing gear?
- Took the plunge with a corona...
- Eolo- Spare Parts
- Corona body question
- Question about Gensmantel Micro Heaven Transmission...
- Small 5V PC Fan?
- Helicopters with Motocalc?
- Logo10 Inverted climbouts?
- Respect your helicopters
- JR G460T gyro settings
- What Brushless for Corona?
- CP Corona question
- Electric JR Vigor!? show me
- Help - Corona suddenly losing power!
- Heli bearings-why?
- Pros & Cons of AstroFlight 020 vs. Mega 16/15/3 and CC Phoenix 35 for LMH Corona
- Stiff Swash Ball
- Worn Out Corona.... maybe...Next Ship?
- new Volz servo for tail
- new Volz servo for tail
- LOGO 10, govenors etc??
- A Couple of GREAT Web sites for parts
- Corona on E Voyager Motor?
- Anyone using Li-Po on stock EOLO motor ?
- Logo10: ~1800kv Motor options/opinions needed
- Need Help: Converting my eHawk to CCPM
- Corona Belt drives, Part II - Can you hear me now?
- Raptor Conversion.
- Corona Belt Drive gear ratios
- Thunder Power Lipoy Voyager - Report
- Corona Hacker Problem ?
- Radio for EP Concept
- Mega mounting on Eco
- Which Lipos for E-Raptor?
- Hirobo Electric XRB Lama left yaw
- Help? Who has Hackers In Stock
- Attaching Hacker heat sink