PDA

View Full Version : Castle Creations

The site map for Castle Creations - Page 9

Pages : 1 2 3 4 5 6 7 8 [9] 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54
  1. 3 Lipos too much for Phoenix 10?
  2. And... Anohter about Upgrading
  3. Phoenix 80 with 9 cells but lower amperage?
  4. Can't program Phoenix 10
  5. astro model pheonix 10
  6. Phx-LINK Settings WARNING (For version 1.00 of PHX-Link software)
  7. Pheonix25/Himax2015 start problem
  8. Phoenix and helicopters
  9. CC 60 Causing gliches on eolo?
  10. usb link hangs on win xp
  11. Bob Kopski Article- May 2004 Model Aviation ESC Noise
  12. USB- Can we revert to an earlier version?
  13. Need help with Brake on Castle Creations griffon 55 ESC!!!
  14. Did I fry it or not?
  15. regenerative braking
  16. Phoenix 60: Can it handle more than 20 cells?
  17. Settings for New Phoenix 35 in Corona?
  18. Phoenix-60, fried first day out.
  19. 1.0 vs 1.01 software
  20. Phoenix 45 and Mega 22/20/2
  21. Pixie 7P or Pixie 20 for 370 motors?
  22. ESC + 4 cell pack
  23. Castle Creations please help.....
  24. PHX45 Cutting out on fresh batt
  25. CC10 not compatable with MicRotex Outrunners
  26. MicRotex and CC10 problem
  27. Phx-Link and P45 problem
  28. Twin Brushless
  29. Just Smoked a Phoenix 80
  30. phx 45 problems
  31. Axi 2212/34 & Cc25
  32. CC 25 To Brake Or Not To Brake That Is A Very Good Question
  33. Video of Rotex 25/6/17 and Phoenix 25 problem
  34. Phoenix 10 and Eclipse 7 problems
  35. Ph25 LVC problem
  36. Pheonix 45
  37. LVC selection for 3s LiPo (Phnx35) - 7.2V or 9v?
  38. LOVE new Phoenix 10 Micro!!!
  39. PHX-Link without BEC
  40. Pixie 10 went -poof-
  41. pixie 20p program mode - cant get to it
  42. programming cc esc cutoff voltage
  43. Phoenix 10 damage question
  44. cd rom compatibillity.
  45. Re-programming Pixie 7p
  46. Advanced Settings
  47. can we have current limiting???
  48. v.1.00 final on web-site..works perfect!
  49. Newbie help
  50. Phx. Link won't "see" new Ph. 45 !
  51. Can't program Pixie 7P
  52. CC P10 Locked up, now what
  53. will my phoenix 10 be ok for 13 amps?
  54. Help – I Can’t Get it UP
  55. BEC updates
  56. Kudos Castle on the PHX-Link!
  57. V1.01 Final release on Website now
  58. mega22/20/2 and cc/60/ esc problem
  59. Problems programming a cc25
  60. PIXIE 7P & KOKAM 2s 1500mAh FIRST USE
  61. Phx-Lnk access w/ Corona canopy installed
  62. A HUGE Thank You to CC
  63. Pheonix 10 has reversed throttle settings.
  64. phx-link ,red lights?
  65. New Hi-amp controller??
  66. RCM&E report of serious interference with Phoenix 35
  67. B20 15L gear and CC 25
  68. Phoenix 25, Razor 400 startup
  69. Ph-10 governor problems
  70. PHX 45 with 8th start bug will PHX-LINK work?
  71. CC USB programmer tips/tricks
  72. Tanic2600 3s with a P25 esc??
  73. pixie 7p
  74. HELPPPPPPP... Phx-60
  75. PHX 10 for 3s Lipos