PDA

View Full Version : Castle Creations

Pages : 1 2 3 4 5 6 [7] 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
  1. Will Phoenix 80 run an AXI 4120/18 ?
  2. Shawn on Vacation 'till the 23rd
  3. CC 25 just wiggles motor back and forth...
  4. A bugged Phoenix 10 traped inside my new Christen Eagle!! (forcing me to destroy it)
  5. USB can set higher LVC?
  6. cc10 work with backup super capacitors?
  7. Phoenix 10 and PJS 300 problem on 3 lipolys
  8. Cutoff Voltage w/o BEC
  9. Phoenix 10 with Razor 350 - Piccolo FP
  10. Propper Settings for an Pheonix 45 and Axi 2820/12
  11. CC 25 cuts out reset program motor no only hummms Whatsup
  12. Brake question
  13. Thanks for the support
  14. Suggestion for a BEC tap on newer or HV ESC's
  15. Pixie 7p dead?
  16. Techies all gone until next week
  17. phoenix 25 amp controller arming switch??
  18. Pixie 7P Cut off
  19. Now we're smokin
  20. Pixie 20 random full throttle, bec out??
  21. PHoenix 10 and Programming
  22. Help!!!!! (pixie 20p and lipoly w/GWS 350c)
  23. Lipoly votage cutoff preference?
  24. Phoenix 45/ Mega 22/20/2 setup?
  25. Pixie 7P shut down
  26. Phoenix 35 won't arm...
  27. bug? No power
  28. Getting pheonix wet...
  29. futaba ff9 and cc10 problem
  30. Dual brushless setup BEC ?
  31. cc10 loses memory
  32. Phoenix 10 dead?
  33. External BEC with Phoenix 80 Question
  34. Programming Pheonix 10
  35. CC45 with Astro 20
  36. I Think I Screwed Up
  37. CC Pheonix 25 + Himaxx 2025-4200
  38. CC25 quick blink when transmitter turns on
  39. CC45 is dead!!!!
  40. driving hacker b20's
  41. Pixie 20P compatibility?
  42. My pixie 7 just won’t take NO for an answer.
  43. New Pixie 20P...no throttle...
  44. CC25 and HiMaxx 2015-4100
  45. CC 10 with 2015-4100???
  46. Does IT Exist Today ??
  47. USB Interface program?
  48. Phoenix 35/ mega 16/15/3 (?)
  49. Phoenix & Typhoon 25A controller
  50. Why I love Castle Creations
  51. CC Phoenix 35
  52. CC Phoenix 80 controller question
  53. chattering upon startup
  54. Horrible Stutter on P-60
  55. cold solder joint
  56. Phoenix 80 dead?
  57. Phoenix 10 cutoff Help!
  58. phoenix 35 solid led/no chirp/and no arming
  59. will cc give core credit for non cc esc's?
  60. so should i get a phoenix-45 or a 35?
  61. phoenix 60 programs like a 45
  62. hard cut-off vs. soft cut-off?
  63. Pixie 20P cuttoff early
  64. CC Phoenix 10 and Axi 2212/26
  65. Help, Servos work, But not the motor!
  66. Hoe do I tell a CC10 from a Astro CC10
  67. esc went crazy
  68. dual brushless and one ESC!?
  69. Old CC 45
  70. To: Castle Creations
  71. Usb?
  72. where to buy CC product (quality problems)
  73. Phoenix 10 Not working
  74. Dual CC Ph-10s and One Battery
  75. CC 45 and Li-poly's?