- Where's the beep?
- Phoenix 10 problem again
- Phoenix 45 or 35, how to tell?
- Don't want BEC. Which wire to snip?
- CC Phoenix 25 Cutoff Voltage Tolerance
- Dragon 35, Aveox 1010/4y/UBEC/6 Lipos
- Cutoff voltage with NiMH (KAN-1050)
- Pixie 7p programming.
- Interference with Pheonix 35
- Pheonix 25 won't save changed settings?
- please can we have a car controller
- LiPoly settings for 3S2P pack?
- ph-80 max amps
- cc-25 blinking rapidly and wont start motor??
- phoenix 25 controller
- switch or not?
- Overload Test - don't try this at home (or anywhere else)
- I just bought this
- CC35 & razor 2500 = stuttering start
- Pixie 20-P Cutting out on Slowstick......
- Pixie7p fried, again! Please help.
- Mamba brushless motors, any more info?
- I saw a pic of the USB programmer
- What does it take to get a purchase
- phoenix 25 and servo
- Phoenix 25 or 35 with a Mega 16/15/3?
- my CC 25amp BL esc shuts down in flight
- CC phoenix-10, - is 12 amps ok?
- 24 cell or 8S lipo brushless ESC?
- CC Phoenix 45 ~ pushing over 55 amps....
- Phoenix 80 leads heating up!
- Pixie 20 w/ Brushless???
- CDROM Motor - Phoenix 45 controller
- Phoenix 10 lost mind?
- Need help. Is it my esc or rx??
- re
- Just Kudos...
- Minimum Temperature
- silly question of the day
- CC10 made for Astro 10
- BEC with 4s lipoly on Phoenix 25?
- phoenix 35 timing w. Mega16/25/4
- PH 35amp controller
- Anyone know how to test a Phoenix 25?
- CC PH25 with only 6 programming options?
- Phoenix 10 BEC overheating
- Pixie 7P with a lithium battery
- Speed limit?
- Higher cell count controllers
- Crashed Pheonix 80
- Pixie 7A for EPS
- Northwest Model Expo
- Hobbico and nimh
- Phoenix 25 won't throttle up properly
- Whatt Meter bad readings
- Availability in Australia ?
- More long wire questions.
- Phoenix-10 also gone bad?
- BEC Question
- External BEC and CC Phoenix 60 - safety question
- Phoenix 25 Programming Questions
- PH25/Hornet Heli Prog. Question
- PHX-Link USB Programer info is released 30/1/03 !
- The Future of Brushless
- Pixie 20P cuts out and BEC dies
- Castle+Mega deal removed from MEC, Price fixing?
- Pegasus 35 Question
- phoenix 25 amp controller
- 3s = 10, 6s = 20?
- PBX-Link Question.
- Twin Brushless Mega 16/15/4 and Phoenix 25 ESCs
- Pixie 20P throttle limits
- EDF set lead length?
- Throttle up full then stop.
- will it work with Microsoft® Windows® Mobile 2003