- Phoenix governor instability with V2.16 firmware ?
- Brake for Thunderbird 35?
- Governor lock at low throttle outputs
- Vertigo Motors
- User info -- why?
- Trouble with new E Revo Brushless ESC
- Free Castle Link
- ICE 75 amp current protection problem
- CC Phoenix 45 HV DEAD??
- ICE Scorpion 3026-1400kv Setting?
- CC PHOENIX 35 and auto calibration throttle
- ICE Lite 75 vs 100
- Faulty ICE 75?
- Phx 35 fluctuating WOT RPM
- Castle Link / Data Graph
- Mamba Max 5700 working intermittantly
- done
- Phoenix 35 spool up
- Running Castle Link Software w/o ESC Connected
- RPM Too High error/warning
- My new Extreme Slayer
- I let the smoke out of a CC10
- Any Idea why my CC Hydra HV180 Quit today?
- 1st Aftershock Conversion to the 2200kv/ESc Combo
- Ice Controller BEC safety
- Won't connect all of a sudden ?
- V2.16 - point of no return?
- Castle Link on Windows virtual machine
- Strange governor behavior on phoenixICE75
- Squealing sound at full throttle?
- Can not connect the castle link- always red lights in the program
- Ice, Ice Baby!
- castle link
- Trade-Up to ICE?
- Timing and Gopvernor gain
- CC Phoenix 25A: brown or blue?
- HV85 Momentary Start on powerup/initialization
- Governor testing graphs and pinion sizes
- ICE 75 Question on Calibrate Throttle Endpoint
- Phoenix ICE 100
- ICE 100 headroom
- Temperature hit 565(F) at end flight?
- ICE log data, how to use it off-line ?
- Castle, now's your chance!
- 2cell or 3 cell auto detect Phoenix-10 ?
- Brand New Castle Phenix Ice 100 -will not Run
- Phoenix ICE 75 Loses Programmed Settings?
- Problem with Castle Link and ICE 100
- My motor is spinning at how many rpms???!!
- ICE LITE BEC for six digital servos
- Phoenix 80 Problem
- Disabled Internal BEC and Castle Link
- Thanks CC! Don't ever lose the BEEP!
- HV85 lowest safe throttle %?
- Please Help! Pheonix 125 & Hoffman Storm70HW EDF Castlelink Firmware
- Phoenix Ice 12s, 100a
- Cc25 F330c
- ICE 100 Data Logger
- Are Hacker inrunners low inductance (phoenix settings?)
- Setting report printout vs. saved question
- Using ICE-50 settings in Ph-35
- CC Ice Rpm vs tached Rpm
- ICE 75 with Hacker, some tail kicking
- CC110HV RX input voltage; 2s lipo??
- ICE 75 PWM Rate For Align 500L Motor?
- Minimum Lipo cell count for ICE con
- Castle 100amp ice -built in BEC ok for Trex600 el??
- Reaper Gr45 and Castle Ice 75 amp not compatible
- 60 amp ESC's
- CC ICE-100 weight gain
- ICE V2.18 Governor
- New CASTLE LINK VERSION: 3.18
- New ice update WARNING
- Flux Tork Motor into E-maxx
- Any way to improve the governer below ~85% pwm?