PDA

View Full Version : Castle Creations

The site map for Castle Creations - Page 47

Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 [47] 48 49 50 51 52 53 54
  1. varaible advance
  2. Cc35 Bec
  3. Castle New BEC
  4. CC25 Governor mode and amp draw
  5. no motor response upon launch
  6. HV85 died
  7. Pheonix 25 keeps cutting out
  8. TBird 36 drags motor
  9. Phoenix 110HV pops a capacitor on spool up - 12S Setup
  10. CC45 programming help needed
  11. CC35/45 id help
  12. twin phx 10 lspj motors 2s
  13. Castle Creations Introduces CC BEC
  14. Slow spool up w/ Phoenix 35 in Governor mode
  15. Issues with CC HV45 ESC and Castle Link
  16. ESC BEC and External BEC Together?
  17. Optimal range of settings for governor gain.
  18. Auto Cut on Thunderbird 18 No Longer Works
  19. problems with CC10
  20. Two 3s Packs in Series
  21. A frying Pheonix 10
  22. postcard from Castle Creations!
  23. Cc 30hv?
  24. Anyone found the CC-BEC available for purchase anywhere yet?
  25. ---------------
  26. Are 4 servos too much for CC35 -
  27. Can't even start/open CastleLink 3.0, "Fatal Error".......???
  28. CC PH 10 fire
  29. Phoenix-10 trouble
  30. Troubleshooting the Mamba 25 "Help!"
  31. castle creations hv110
  32. Appropriate or not?
  33. CC25 with Hacker A20-20L: Suttering and won't spin
  34. Griffin 40 esc
  35. Berg 7 compatibility with 12Z
  36. Help!: PHX-Link - Device Connectin Status RED
  37. inductance
  38. What controller is this
  39. 2.3mm Shaft?
  40. hv85 won't accept programming
  41. AD Proposal
  42. I Love My Job!
  43. First Class Postage Option
  44. Hydra HV controler
  45. New CC Thunderbird 6 Controller
  46. Thunderbird custom cutoff voltage online now!
  47. Program 2 escs together?
  48. Bec
  49. mamba max programming
  50. CC25 not working. Is it dead?
  51. USB programming HELP!
  52. CC35 Led signal: Prop strike (but there isn't)
  53. Tired CMS36XXXX
  54. Twin HV85's won't arm at powerup
  55. Please help me troubleshoot my Berg 7
  56. thunderbird 18 cutoff
  57. Power Setup Needed for Scale Stinson Trimotor
  58. CC Phoenix 25 leads the wrong way round.
  59. Phoenix Link and disabled BEC
  60. set up for dual cc bec's
  61. New products video from NEAT fair
  62. NEAT Fair 2007 pics/vids
  63. Berg 7 and Castle Link 3.01
  64. thunderbird 54 cuts motor off immediatley!!
  65. I goofed with CASTLE LINK. Need some help...
  66. Help with the USB Link
  67. Berg 7 & Futaba 4exa problem
  68. Cctb18
  69. CC Phoenix overheat protection?
  70. 4-channel Berg Micro-stamp Weight (11Grams)
  71. Twin Esc Link Programing
  72. PH80 overheating?
  73. Cc 25 Esc
  74. What happends when brake is on.
  75. How to set throttle endpoints on a PH35?