PDA

View Full Version : Castle Creations

The site map for Castle Creations - Page 40

Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [40] 41 42 43 44 45 46 47 48 49 50 51 52 53 54
  1. CC 10 with axi 2204/54 problem
  2. phoenix 10 firmware !
  3. Phoenix 25 V1.54 + AXI2212/26 won't start
  4. Twin ESCs
  5. Setting less than full throttle w/fixed endpoints?
  6. First scale brushless boat
  7. Where to Get CC ESC Servo Plug?
  8. CC 60 gettin hot
  9. OK, Castle, where are my decals?
  10. Berg 4L non-functional from the get-go.
  11. Berg 7P programmability
  12. Berg4L, New, Antenna winding! Thanks CC!
  13. Twin startup problems w/fixed throttle
  14. Factory Tours?
  15. What's The Amp Rating ??
  16. cc 80 doesn't work with usb link!
  17. HV45 new/old versions?
  18. Older CC45 with latest firmware cutsout at about 2/5 throttle
  19. 85hv
  20. Berg 4L problems
  21. PH45 acting weird
  22. Berg 4L Problem??
  23. Pixie-7P
  24. Berg 7 not working with Stylus TX
  25. Loose PCB in Berg 7?
  26. Castle Link not responding!
  27. t-bird 9 cutting out
  28. Pixe 20P problem
  29. Cc25
  30. Repair Questions???
  31. Phoenix 10 shutdown???
  32. Phoenix 85HV in a buggy
  33. Low Voltage cutoff problem Castle Phoenix 25, 2.2 firmware
  34. CC35 Settings with REVO CP "Cool Red"
  35. 45HV on 3S
  36. 45hv
  37. Berg channel confusion
  38. "Checkup" for older Berg-5 DSP II?
  39. Is the Thunderbird 9 a reliable ESC?
  40. Berg 7 'failsafe'
  41. 3A BEC version or not?
  42. Programing a CC 45 HV?
  43. Need help with Berg 7 in a carbon fuse...
  44. CC 45 HV arming sequence
  45. smoother startup for outrunners?
  46. Castle 60 BEC
  47. Problem with Throttle Matchup on pair of PH-25's
  48. Berg 7P Crystal
  49. Futaba failsafe and Phoenix controllers.
  50. field programmer for ESC's?
  51. Spektrum AR6000 Question
  52. "Pulsing" warning when using the Governor
  53. will this combo work with a futaba 9C
  54. phx 45
  55. Just wondering if Berg is going to make Spectrum receivers??
  56. crystal not seating in the 4 channel
  57. Name that ESC
  58. upgraded my esc now i bog in gov mode
  59. thunderbird 18 low voltage cutoff
  60. T-bird 36 ESC availability.
  61. HV-45 quality of current shut down??
  62. Castle Repair Response Time
  63. Thunderbird 18 LVC not working...
  64. CC10 Startup Error
  65. HV controlers having issues
  66. Phoenix latest software update
  67. Older non-lipo Phoenix25, can it be updated?
  68. New to Cars- MambaMax programing question
  69. Cannot enter programming mode - Tbird9 and Flash5x
  70. T-Bird 18 Burst rating?
  71. Phoenix-25 BEC voltage
  72. HV85 Will Not Connect To Castle Link
  73. Mamba Max Connectors
  74. Surface Bergs?
  75. TB-18s with no decals on them?