- CC35 cutoff problem with V1.22 firmware
- Cc25 Take A Look
- How hot is hot?....CC-10 BEC hotplate
- I have a question about a Patrick of CC post about current at the controller.
- Phoenix 10 BEC?
- Why is it taking SO LONG
- Stuttering
- Issue with an older CC10 version holding 7A
- Efficiency of part-throttle BL operation? (CC-25, 35)
- Thunderbird 18 Programming Mode Problem
- Max number lipos for CC45
- new feature for Phoenix speed controllers?
- Dear Friends, please help me. I have a Problem with Mamba Link
- Problems with new cc60
- Castle Link v2.10 error
- timing
- heli- dual ESC's keep both BEC's?
- Phoenix 10 + Astro 010 Glitch on Hummingbird
- Latest "v." isn't always the best way to go.
- reduce headspeed on CC25 governor high mode?
- Going through withdrawl...need more BERG Receivers...
- PH10 and one Lithium cell?
- How to identify my Phoenix has auto-lipo?
- PHX 60 + 4s + BEC?
- Why is the soft start for helis not so soft.
- Ph 85 HV and Ph Link
- LVC on Phoenix 10
- Thunderbird 18 Whats with the BEEP?
- PHXs Firmware source code for us to fix?
- Advance and small outrunners
- How to tell it has 3A bec?
- optimum switching rate hacker b40 CC80
- Help with my CastleLink please
- 110 HV and 85HV ( JUNK)
- CC10 with Kontronik Dancer outrunner
- Fried my CC 45 ESC Urrrrr
- CC Controllers with digital gyro
- TB-18 LVC setting for Lipos
- BR RC, auto lipo detect?
- The great "how many servos can I run" debate..
- cc 35 with a hitec 535
- Why do we have to have a seperate bec?
- How do I go back?????
- P-35 strange failure
- Max lipo cells for TB9 and TB18?
- Letting the smoke out of Pixie 20P
- cc35 with Outrunner -> Overheating problem.
- Thunderbird 18 Power problem???
- Help!! Throttle shutdowns CC25
- HV-85 Problems
- Mamba Motor is Confused!
- Defaults on CC35
- New Phoenix-10 Problems
- Thunderbird 18 locked up? Reset to factory defaults?
- cc45A fried, where to send for repair?
- Pheonix 10and a CustomCDR
- cc 35 cut off
- CC10 for upgrade: F330 or F221 ?
- A couple of questions
- When are heli pilots going to get attention?
- Phoenix and brake settings
- CC25 - outrunner snyc/timing problems
- Castle Creations Newsletter - Volume II
- CC-35 " auto calibrating" problem.
- Berg-4 receiver for FREE
- TB 18 and himax 2025
- Phx LInk w/CC60esc & UBEC (Help)
- Pheonix 80, HV upgrade?
- Red LED on power
- Question for C.C
- Burnt out CC10
- HV-45 Specs?
- Normal Phx-25 temp?
- CC35 with Hacker A30 motor...
- Hey CC, please post the contest results!