PDA

View Full Version : Castle Creations

The site map for Castle Creations - Page 28

Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 [28] 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54
  1. CC-125 dies early death but customer service top notch
  2. PH45 + Hacker B40-8L
  3. Rumor has it----
  4. About phoenix-10 cutoff
  5. CC10 Throttle Shutdown Problem
  6. A new problem for me
  7. Will Phoenix 60 Handle a 6S LIPO at 50 amps?
  8. First time PHX10 user
  9. Verifying Programming for CC35 and Trex
  10. Phoenix 25 surging on startup
  11. Throttle on Pheonix 25 with himax 2025-4200
  12. Phoenix 35 with v1.161 firmware
  13. P25 Blues on T-rex
  14. HV 85 cut off
  15. PH45 not a good start?
  16. CC35 in governor ??
  17. New Castle 35
  18. Why does my CC-125 blow away my HM-195?
  19. cc35 settings for a Aon 3500
  20. PHX 35 wont program
  21. I have more Planes then RX
  22. Phoenix 10 Pulse Specifications
  23. PHX 45 vs 60
  24. Not the Bergs fault.
  25. Castle Creations Phoenix-25 Settings for Hacker A20-20L?
  26. New Phoenix 45HV dies
  27. How's the gov mode on CC45 HV for outrunners?
  28. Phoenix 25 burning up
  29. Phoenix 10 changed brake setting
  30. Pixie 7P cutoff query.
  31. CC-25 running 6s340 lipo?
  32. Ratings Question
  33. P25 vs P35 vs P45 to use when max current is 20A?
  34. Castle Creations mailing list finally created!
  35. Phoenix 60 start-up problem
  36. tail motor quits
  37. Berg receivers
  38. Patrick, should this Phoenix 25 be programmable via Phoenix Link?
  39. I stopped by Castle Creations today...
  40. Great Service from Castle/Berg
  41. why no arming???
  42. Locked out ! !
  43. PH-25 no longer getting hot
  44. Noise - HUH?
  45. Problems with PH 85 HV and CC
  46. Programming Castle Creations?
  47. 5400 kv motor/GWS GB
  48. 1.021 - Sometimes its there, sometimes it isn't
  49. Setting Cutoff voltage for CC 25
  50. Question about Phoenix 25 start up (crash related)
  51. does the cc45hv have a peak current?
  52. PHX 45 issues.
  53. Information on Phoenix over heating???
  54. CC 60 and 80...glitch or BEC issue.
  55. Are the Thunderbirds available for purchase yet?
  56. Advanced Governor Software
  57. What's the max electrical rpm in governor mode?
  58. Thunderbird 18 & PHX Help Please
  59. Phoenix 10 "Stuttering"
  60. Will the 45HV play nice with a Tango? (Gov Mode)
  61. Is this a Phoenix-35 or a Phoenix-45?
  62. Old PHX35A?
  63. CC60/80 Voltage cutout
  64. PHX 80 component damage questions...
  65. WARNING Castle Creations Phx 25 wires desoldered
  66. New PHX-25 question, highest voltage with BEC?
  67. Castle Creations BETA Program
  68. Castle ESCs vs. Kontronik JAZZ observation
  69. cc 10 needs repair
  70. CC PH-25 replacement-when were?
  71. Castle Link 2.04 available
  72. Help on (RE) programming PHX-60
  73. Problems Setting up my first Brushless
  74. Beak on Pixie?
  75. CC25 Hot as well