- Product I'd really like to see!
- Castle Link - what else is needed.
- CC PH60 problems
- P125: possible to shorten the capacitors?
- Pixie 7 needs service
- Phoenix HV Flight Testing
- CC 80 help needed
- 1.15B - questions
- Phoenix software wishlist
- Pushing BEC rating, need advice badly!
- Help diagnosing a problem
- 2204/54 & Phx-10
- problem castlelink v2.01
- Antenna length for Berg 6?
- Can't enter programming mode on a new Phoenix-25 ESC
- New issue, same problem
- Phoenix feature request: elapsed time
- Berg 6* DSP G III
- New 1.16 Version Update Bugged
- Thunderbird Brushless Controllers
- Feature request:Throttle interlock
- increasing software versions worse for selfmade CD-rom
- increasing software versions worse for selfmade CD-rom
- Downloading Castle Link 2.02
- GWS receiver or continue to wait for Berg?
- Castle Link 2.03
- Phoenix-125 - where to buy?
- Phoenix 45HV - Where to buy?
- Berg Receivers?
- Castle Phoenix way to noisy
- Best setup for Phoenix 25 and Outrunner
- Phoenix 10 - won't start, LED on solid
- "Bad Outrunner mode"
- V1.161 and P10 runs hot
- Phoenix 10 arms but LED stays on
- axi 4120-14 phoenix 80 glitching!!!
- Table of version characteristics?
- Problems with Sprite 25
- 6S Lipo - do I need HV?
- One in ten thousand
- CC Link/Pheonix link for hv controllers.
- Phoenix 45 Too Hot?
- Size & date on ESCs
- cc35 Governor mode will not work on DH400??
- berg 7ch receiver
- Castle Link 2.3 Error--"Cannot connect to Database"
- Does berg5 DSPII cut power on signal loss?
- HO to get update fixed?
- Current Limit
- OH that smell
- axi 4120-14 cc45hv freq and timing
- AXI 2212/26 with P-25 best firmware?
- CC25 not working....any ideas?
- Problem with CC45 and AXI2820/10
- Phoenix 35 - autodetect not working
- Axi2204/54 and P10 - timing ?
- Phoenix HV Production Problems?
- Customer Service
- Pegasus 35P "Noise"
- Phoenix-80
- ESC power wires - twist or not?
- Setup my PHX 35 Heli
- can the phx-60 be updated for 5s lipos?
- Two Phoenix 25 ESCs not working
- Castle Creations has great customer service!
- Effect of Temperature on Berg Receivers
- Twin motor setup
- CC125: could it stand 7 Lipo cells ?
- CC 25 Phx Link ESC not connected?
- The latest software
- What about old Berg RX`s that need Repair?
- Another plus
- HV Governor
- P35 cutout in my TRex
- REALLY strange PHX25 problem……….