PDA

View Full Version : Castle Creations

The site map for Castle Creations - Page 19

Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [19] 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54
  1. Ph25 won't start Himax HC2812 + 3S Lipo
  2. v1.1 problems
  3. Auto Cell Count Detection
  4. CC10 getting hot
  5. CC25 BEC Thermal cut-off
  6. Probably dumb question CC-25
  7. Setting PWM Frequency
  8. Half throttle blues
  9. Phoenix 25. Hot or not.
  10. Castle Creations ESC Question.
  11. CC Phoenix 25 ESC Setting
  12. Pixie 20 Surges?
  13. CC 25 cutoff problem
  14. Castle Creations
  15. Low Throttle Stutter P25
  16. Older CC Ph10 Question
  17. Governor problem
  18. Glitchy CC25
  19. Cant enter programming mode
  20. Pixi-Lite LV
  21. Problem with a CC Phoenix 25
  22. Castle has done it agian
  23. Phoenix Timing Settings
  24. Can it handle more than...
  25. only 2v on cc phx25?
  26. Magnetic Interference
  27. Timing? Fixed Throttle?
  28. Castle Creation Brushless ESC 45 Shuts down motor inflight. NOT HAPPY!!!
  29. Mamba setup question
  30. Motor and ESC for e-Maxx?
  31. Phoenix 80 only putting out half power
  32. How to install on/off switch with Phoenix-35
  33. phoenix controller ??
  34. How many operate at 1/2 throttle or less.
  35. Problems with JR R610 and Phoenix 35?
  36. Motor wont run with 7P
  37. ph35 low throttle squeal
  38. Phoenix 60 Question
  39. P-60 & 6S?
  40. blinking PH10 w/ mixer/gyro board?
  41. Need help with PHOENIX 45
  42. AXI Phoenix 45 HELP!!!
  43. Pheonix 45 early cutoff question.
  44. New version Phoenix 35
  45. phoenix 10 repairs?
  46. Phoenix 45 overheating
  47. Can We make this a Sticky?
  48. High Voltage ESC with BEC
  49. pixie 7 or pixie 20 for speed 370 motor
  50. Phoenix IDs?
  51. Fried new phoenix 25?
  52. what cut off voltage?
  53. Phoenix 10 Standby Current
  54. ECO won't start then glitches
  55. brand new Pheonix 10 ESC not working
  56. Will the BEC be able to handle this?
  57. Programing P45
  58. Castle Products Rocks!
  59. CC Phoenix 45 bec on 4s and 4 micro servos?
  60. Analyze this
  61. Please help....I just bought a new cc 25 and I have issues.
  62. PHOENIX-25 Problem ?
  63. Any High-Voltage ESC in the Works?
  64. Phoenix-10 programming
  65. What the???????????????????
  66. PWM Frequency
  67. Himax 2025-5300, Phx 25, TP 2100 Gen 2 cuts off
  68. Is it true ?
  69. Help troubleshooting CC25
  70. Glitching while using PH35 pls help
  71. Installing Phoenix link on laptop
  72. 1st Berg Qestion
  73. PHX-Link Problem...Help Please?
  74. PHX-Link work with Mamba?
  75. Phoenix Receiver Wire Meltdown/CD motor?