PDA

View Full Version : Castle Creations

The site map for Castle Creations - Page 16

Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [16] 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54
  1. Add On/Off switch to Phoenix 25
  2. Problem with my Pheonix 25
  3. CC60 & AXI 2826/10 problem.
  4. Mamba Link testing
  5. Can't make brushless to work
  6. Auto LVC works on one but not the other
  7. ESC output voltage regulation?
  8. Excellent Service
  9. Phoenix 10 and 3s Lipo
  10. I was going to ask about HV controlers again...
  11. Plugged Triton into PH10
  12. sprite 25
  13. Led is on on full throtle?
  14. Extending ESC Wires
  15. CC25 Soft Start?
  16. Need Info on My setup
  17. New CC25 wont start
  18. Who has the best price on a PHX 10?
  19. Outstanding service
  20. Pixie 20 with 4 submicros.. any chance?
  21. Can I use a 4S3P on a phx 25 while using the BEC?
  22. Which Phoenix is this?
  23. i need more length (don't we all?)
  24. Strange PH10???!!
  25. Phoenix 60 and UBEC Problem?
  26. Phoenix25 and 10 nimh cells
  27. Motor cutting out with CC-25, and Himax
  28. Understanding governor mode?
  29. Himaxx 2025-5300 & PhX 30 & Hitec Focus 3CH AM
  30. Ph60 1.021 softest start doesn't work
  31. motor lead came off
  32. older pheonix 10 can it be programed
  33. how to differentiate
  34. Custom voltage cutoff problem
  35. reversed polarity on new Phx 10
  36. Lipo and voltage cut
  37. PHX10 & MP-jet AC 25/35-20 chatters
  38. PHX 10 BEC better than PHX 25?
  39. Castle Creation 35A and CDRom
  40. throttle won't work---do I need an adaptor?
  41. Which Mamba di I have?
  42. Mamba-waterproofing?
  43. P60- software
  44. Cooked Phoenix 60 ( my fault )
  45. problem w/ phx 25 programing mode
  46. Auto Lipo Cutoff and Nimh cells
  47. cc45 keeps shutting down in hover
  48. High Voltage Esc - The future for electric heli's?
  49. Question on 4s and CC25
  50. My 35 is acting weird.
  51. Trouble with new 35A CC ESC
  52. CC Pixie 20P with hitech gear
  53. Newbie 20P question on LVC
  54. CC and non RC projects???
  55. 35 Mhz - Receivers from Berg, Schulze, Potensky
  56. Castle Creations Support
  57. Soft Cut explained ?
  58. cc10 glitches, futaba receiver?
  59. PHX LINK won't work
  60. What cuttoff Voltage setting for 3S Lipoly Pack?
  61. Wiring instructions!
  62. Brushless Aveox 27/13/4 with PHX-25 gets VERY HOT!
  63. Pixie-20 max cutoff is 8.4V
  64. HImax stutters with phoenix 25
  65. CC Logo
  66. Known issues with the 1.07 update?
  67. Lehner 1930/8D and cc80
  68. Phx 25 all of a sudden stutters
  69. Auto Low Voltage for Pheonix10?
  70. Castle's Definition of "High Torque Servos"?
  71. Phx 25 & motor cut off problem
  72. I thinbk my PHX 35 is crashing/glitching my planes!
  73. AXI 2826/12 with Phoenix 45 settings
  74. Suggestion for Castle Creations firmware release.
  75. Updated Phx 45 design, or mis-packaged Phx 60?