PDA

View Full Version : Castle Creations

Pages : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [15] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
  1. PH-35, 4s Lipo and BEC?
  2. Problems w/ Phx link
  3. Castle Creations PHX-Link and Phoenix 45
  4. hey shawn...did you get my phx-10?
  5. phxlink v1.05 not good for my axi
  6. BEC output ? 4.8 or 6 v ?
  7. Variable DCV supply for testing Feigao IPS Brushless
  8. cut off voltages with TP lipo?
  9. Big (4120) AXI question.
  10. Max rpm for CC phoenix esc?
  11. Two separate issues with two separate controllers.
  12. Governor Mode, Auto-Calibrating, Thr/Pit Curves
  13. Phoenix 25, rough start question.
  14. pixie 7p
  15. measuring rpm max
  16. Phoenix-25 Cut-off too early!
  17. My squeaky ESC no worky
  18. Phoniex 10 and B20 15l
  19. My start up beeps have gotten quieter
  20. Down load problems
  21. CC10 and CC25 question??
  22. How long can I run max rated current?
  23. Cudos to the guys at Castle!
  24. Am I able to make computer linking cable myself?
  25. PHX-Link Issue
  26. Phoenix 25 going whacko!
  27. Pixie 20 throttle cut-off issue
  28. Phoenix 25 & Nippy 1812/100 Outrunner
  29. Two Brushless Motors and One Phoenix 10 - OK?
  30. stumped
  31. Phoenix governor problems
  32. CC esc + battery - motor = smoke!
  33. Pheonix 25 upgrade problem
  34. CC25 overcurrent or overtemp limit??
  35. Phoenix amp rating?
  36. Fast service from Castle Creations!
  37. cc 25
  38. some problems that I had with cc s/c that was odd
  39. Phoenix 35 Problems
  40. Help! CC10 fried while testing servos
  41. Phoenix 25 and the number of servos
  42. CC-35, Light on, BEC on -- no chirp no throttle
  43. CC 25 wont work with..........
  44. Help with Pheonix 25 and himax 2025-4200
  45. PH10 "idles" hot
  46. CC25 & parallel 3s lipo's
  47. Phoenix Link software 1.06B has auto-lipo LVC!!!
  48. default settings?
  49. Phoenix 25 will not enter program mode.
  50. HELP!!I tried my Phx-Link, now my ESC doesn't work
  51. Rating for CC PH10 BEC?
  52. Phoenix 10 wiring questions
  53. Think my PHX-25 is dead
  54. CC10 ignoring soft startup problem on 1.06
  55. It's dead Jim (Phx 80)
  56. ESC not recognized by Phx-link
  57. PH25 gets WAY TO HOT !
  58. Welcome Bernie, Have Phonix 10 Prob
  59. Phoenix 10 got hot! black box in back melted covering
  60. Phx Link ; Phoenix 60 ; Ultimate BEC ; won't recognize
  61. Phx-link driver and Windows update.
  62. Motor surging ,No power
  63. :( Phoenix 25 glitching my zoom
  64. Am I going to be okay with this setup?
  65. PH35 & AXI 2808 problems
  66. Ph18 ?
  67. Mamba-Phoenix Link Software
  68. Gauge of wire to motor used on Phx10?
  69. PH10 won't stop motor
  70. PWM switching rate default
  71. Updating Dual ESCs with Phoenix Link
  72. PHoenix 25 and Astsro Wattmeter Not Compatible?
  73. Mamba-Link beta testers needed!
  74. Current Limiting options?
  75. Difference 1.07b and 1.021 final??