PDA

View Full Version : Castle Creations

The site map for Castle Creations - Page 13

Pages : 1 2 3 4 5 6 7 8 9 10 11 12 [13] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54
  1. Hey wheres my MAMBA stickers?
  2. twichy servos
  3. Does buying oversized ESC help cooling??
  4. Need help optimising my CC10 for CD rom.
  5. Sailplane Question (Brake)
  6. red light in flight?
  7. Dead Ph-10?
  8. LVC Differ
  9. Determining current SW on ESC using PHX-Link
  10. A question about ESCs, BECs, and servo failure
  11. Next software update.
  12. Hi voltage ESC's - when?
  13. Pixie programming question/radio setup
  14. Phoenix 35 won't respond after Link errors. Any Ideas?
  15. Which Governor Mode for Razor Motors?
  16. Supply Problem for LHSs?
  17. AXI 2212/26 & CC 10 - squeal on startup?
  18. Phoenix 45 running a new MPjet outrunner
  19. idle current
  20. Phoenix 60 and AXI 41-20-18 problem
  21. Phoenix 25 problems
  22. CC 25 Warm to touch without running
  23. CC 45...aaarrrggggggg
  24. Currnet Software: Unknown
  25. Software update kills governor mode
  26. 16 GA wire on CC Phoenix 45?
  27. 10AMP CC whats going on?
  28. How about a sticky with some basic beginner info?
  29. Castle Creations - Best Service in RC?
  30. hacker baby and pheonix 25
  31. cc pixie 20p smoking and it's all my bad
  32. CC PH 25 and MP Jet AC 25-35/20 - vibration in mid range
  33. P10 or P25 for Shogun Heli application?
  34. Why can't I set a custom LVC of 5.x volts ?
  35. Connectors for ESC to BL motor
  36. Do you want a 5V Custom LVC on a CC10 ?
  37. I'd like to see a smaller brushless ESC.
  38. lvc setting? on a phoenix 45?
  39. Micro Heli and the BEC (s)
  40. 300 motor beeping continuously, pixie 20p esc?
  41. Phx 60 just updated from CC needs software update to program with Phx Link??
  42. Summary of Govenor mode problem Please.
  43. CC PX 45 problem
  44. How do I tell the difference between phx45 & phx35
  45. Optimum settings for AXI 2802/24 and Phoenix 25
  46. Settings for PH45 and Mega 22/20/2
  47. Possible P-35 issue?
  48. configuring ph 10 pixie 7
  49. Smoked Phoenix 45 first flight.... Logo 10
  50. internal error--PHLink
  51. PHlink not recognizing a CC25
  52. phoenix and twister 40 motor?
  53. Phoenix 80 problem
  54. Why no 18?
  55. Here's a vital controller question....
  56. What is the max rpm a Phoenix can spin a 14 pole motor at?
  57. Pixie 20 problem
  58. Where do you plugin the PHX-Link on a Phoenix 25
  59. Phoenix Contoller With 6s Li-Poly
  60. No Soft Start on CC25
  61. oops, wrong button
  62. Something Strange going on
  63. Is pixie 7 operating normally?
  64. Motor feeling weak after things heat up.
  65. USB Programmer
  66. Phx80 - Need to be returned??
  67. New CASTLE CREATIONS GRIFFIN-55 BRUSH ESC!
  68. CC Phoenix 25 cutting out at half throttle :{
  69. What are the pulse width limits (mS) for Fixed Throttle endpoints on P25?
  70. Phoenix 80 wont program
  71. Where can I download PHX80M manual?
  72. Official Instruction Manual Change Request
  73. Phx-80 Axi 4130-16
  74. Ph 25 rough at low end
  75. Phoenix 25, 3s lipo, 4 micro servos?