PDA

View Full Version : Castle Creations

The site map for Castle Creations - Page 11

Pages : 1 2 3 4 5 6 7 8 9 10 [11] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54
  1. PHX-Link software version?
  2. Current controller
  3. BEC and receiver battery
  4. Airflow Effect On CC Phx Esc's Bec ??
  5. Does Windmilling Prop Cause Problems?
  6. Pegasus 35 advice
  7. Timing & Frequency for Hacker/Mega?
  8. great service by castle creations
  9. Battery to PH80 wire length?
  10. phx-link software updates
  11. Increasing wire lengths on ESC's
  12. Twin Phoenix 25s and Twin Himax 2025-4200 -- one works - one doesn
  13. Pixie 7P Programming question
  14. CC p-10 shutdown while inverted?
  15. Phoenix 35 glitch
  16. Adding CAPACITORS
  17. P-10 Gov. fix?
  18. Firmware enhancements request (possible?)
  19. Phoenix 35 question
  20. Prop horizontal when motor stops??
  21. Can't beat CC service.
  22. Is there an astro version of P-10
  23. PHX Link Feature request list
  24. PHX45 Heating up with no throttle applied!
  25. Xenon=Castle Creations ?????
  26. Employment opening at Castle Creations
  27. Tell me about Phoenix60 for gov mode, please.
  28. Old Cc-10
  29. BL tailrotor for my micro heli. Phoenix 10 just blinks it's light.
  30. PHX-Link Question
  31. Having Pixie 20P Problems with throttle only...
  32. How Hot Can a Phoenix 25 Safely Get??
  33. How to tell type?
  34. Solving WOT cutoff while hovering options, best?
  35. Phoenix 45 ESC.. translation, please?
  36. Need 20 cell, 50A controller
  37. mamba and phx-lnk
  38. Settings for CC 25 and AXI 2808?
  39. Griffen 45. Motor on by itself
  40. Phoenix 45 will it work
  41. Help with old Phoenix 35
  42. Radio Glitching with Phoenix-10
  43. Phoenix 25 and 35 loosing sync
  44. Pixie20 reseller in the UK?
  45. Patric.........Shawn! How about a palm interface w/ link?
  46. Missing wire
  47. Anyone Have This Problem w/ CC 25?
  48. lvc on 3s
  49. Mamba is SICK
  50. RPM fluxuation in P10 governor mode
  51. Who is gonna be my HERO??? CC25 Programing
  52. Phoenix settings questions
  53. Diode on controllers to prevent reverse polarity damage?
  54. HI or LOW Governer with Axi motor
  55. Glitching with HiMaxx HA2025-4200 and Castle Creations Phoenix 25
  56. Phoenix Link Question
  57. Bought a used P25, is it safe???
  58. New P10 and phoenix link problem
  59. Softest Start still bumpy
  60. PHX-Link for none BL esc
  61. Phoenix 45 and Oribit 15-18
  62. Phoenix 45 problems/questions
  63. Wattmeter + Phoenix for LVC programming??? Something to keep in mind!
  64. cc45
  65. Phoenix 80, 20 cells, 40A
  66. Re USB interface
  67. Will 1 P25 run two Himax 2025-3200 motors?
  68. Castel creations in India?
  69. P-10 'Lite' from Horizon ... what's that?
  70. Is my Pixie Fried?
  71. Phoenix10 & CDR motors, squeals at 100%
  72. Poenix 60 software upgrade
  73. Mamba 25 questions
  74. need FAQ for castle!
  75. Using 4 cell Lipo pack with P35, possible?